Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Just finished this. Still need to clean off some of the buffing compound.
This is the one I have been looking for a nice chassis for, and, may have found one.
Original grill cloth.
(This post was last modified: 11-17-2012, 06:41 PM by Phlogiston.)
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
That looks stunning!! Great work
Gene
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Thanks.
Did the 70 ever come with the same knobs as the 90, 3 rosets and 1 small one, rather than 3 small ones.
Also the knobs I have are black rather than brown (rosets). I have only seen brown ones before.
(This post was last modified: 11-17-2012, 07:19 PM by Phlogiston.)
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Phlog, a very nice job on that cabinet.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Thanks Jerry. It's on display right above the 111. It would look better if it had a chassis in it.
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
What I've heard is that the black knobs are for the car radios/Transitone. Don't know if this is true or not.
Terry
ps NICE JOB!!!
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Quote:Did the 70 ever come with the same knobs as the 90, 3 rosets and 1 small one, rather than 3 small ones.
Also the knobs I have are black rather than brown (rosets). I have only seen brown ones before.
I think the knob combination use on the Philco 70 and 90 varied but I don't think they ever used black knobs on the 70 or 90.
Steve
M R Radios C M Tubes
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
What a handsome cabinet. Classic for a reason! Great job on making it look its best!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Nice!!
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Thanks guys.
I have another chassis on the way. I'll clean off the dirt and mouse- unmentionables and hope that it is in better shape.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Great! Wish you luck finding a chassis.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Phlog, I don't know if the 90 chassis will go in there but as you know, I do have one with good iron and coils, only missing a couple shields and a socket shield. I think you know where those went.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Quote:Phlog, I don't know if the 90 chassis will go in there but as you know, I do have one with good iron and coils, only missing a couple shields and a socket shield. I think you know where those went.
A 90 chassis will not fit in a 70 cabinet.
Steve
M R Radios C M Tubes
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
I would have felt bad about putting a 90 in a 70 cabinet anyway, maybe just until I found a good 70 chassis. I've got this super nice 90 just waiting for a cabinet. I just keep finding 70s though. I do have the Mershon caps all rebuilt - just could not wait. The new (er) 70 chassis is supposed to be here next Monday.
We have another public display scheduled for Jan. around the 7th in one of the Jackson Co Libraries. I would like to have this one done before then. I would also like to display the 111 or the 37-116 that I have shown you guys, but both of them are so heavy and I would feel awful about damaging either. Up to this point we (wife & I) have just displayed table tops and a 37 Zenith 6-S-52. It looks nice, but more important it is a lightweight compared to the Philcos.
What I am surely going to do is display my "spare" rebuilt 37-116 chassis, Philco tubes and all. People seem to like to see the "guts".
Anyway, thanks for all the compliments guys. Oh, and Ron, could you bring that new truck over here to move some radios?
(This post was last modified: 11-27-2012, 10:21 PM by Phlogiston.)
Users browsing this thread: 8 Guest(s)
|
Recent Posts
|
Philco 46-420 Code 121 Reception issues
|
Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
Philco 46-420 Code 121 Reception issues
|
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
Philco 42-1008 conversion kit
|
Interesting. I haven't seen that before.klondike98 — 07:02 PM |
12' Philco
|
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
Shadow Meter Bulb
|
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
Shadow Meter Bulb
|
Ok. Thanks for the correction.RossH — 03:09 PM |
Model 28L
|
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
37-60 revision 6
|
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
Shadow Meter Bulb
|
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
Hickok AC51 tube tester
|
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
Who's Online
|
There are currently 6793 online users. [Complete List] » 1 Member(s) | 6792 Guest(s)
|
|
|
|