Can anyone identify this radio
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Craig's listing, calls it a Zenith but I didn't think they uses the shadow meter. Any idea of the make/model?
Jerry
http://flagstaff.craigslist.org/atq/3440717478.html
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, Zenith did use shadow meters in these early 30s sets.
The set in the pictures is a Zenith model 755.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
TA, your the man. Thanks again for expanding my knowledge. I figured they went with the good old eyetube.
Nice looking styling but then again, it is the "Z" manufacture.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Looks alot like a Philco 19!!!!
Terry
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Guess that's why I liked it Terry. Looks like I'm buying, need another console like a hole in the head. This is an addiction!
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Every hobby is an addiction, didn't you know?
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I'm not a Z guy but I have a Z model 775 and it's actually a pretty good set. If I had a chance to buy another early 30s Z I probably would.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
TA, I'm thinking about it. You should be very careful admitting openly on the Phorum possession of a model Z. This could result in a demotion from Expert status to Noobie! Contrats on your 1200th post.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The oldest radio in your humble host's collection is a brand Z Super VIII from 1924.
Philco didn't enter the radio manufacturing business until 1928.
--
Ron Ramirez
Ferdinand IN
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
+++ for you Ron, you do style flex! I guess TA is safe from demotion?
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The early 30s Zs just appeal to me. They are fairly well laid out to work on, and the prices/availability of parts is better than those of the later 30s sets. The styling is fairly gothic, but again that appeals to me.
My 775 is a 12 tube set, BC only BUT the BC band is extended to 1750KHz. It has two speakers, variable sensitivity, and illuminated tone and volume control indicators.
Should you choose to acquire some of these era Zs, you should have a fair amount of success in doing so.
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Early brand Z radios from the late 20's and early 30's are near impossible to find around here. That said, the few I have run across seemed to be good radios.
No matter where you go, there you are.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
For anyone interested in the C/L listing, I visited the radio today. Cabinet needs a lot of glue, most joints are loose. All wood is there. Chassis looks untouched and the power transformer/field coil and voice coil all test good on resistance. Mike is open to offers, even chassis only. I don't think the cabinet would hold up well to shipping.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Man, I would like to BUT I'd better stick to what I am doing now.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Jay, there was a fellow up in Buffalo, NY, last summer who threatened to saw his LOVELY model 244 up after several unsuccessful tries to sell it!
Users browsing this thread: 3 Guest(s)
|
Recent Posts
|
Philco 46-420 Code 121 Reception issues
|
Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
Philco 46-420 Code 121 Reception issues
|
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
Philco 42-1008 conversion kit
|
Interesting. I haven't seen that before.klondike98 — 07:02 PM |
12' Philco
|
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
Shadow Meter Bulb
|
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
Shadow Meter Bulb
|
Ok. Thanks for the correction.RossH — 03:09 PM |
Model 28L
|
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
37-60 revision 6
|
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
Shadow Meter Bulb
|
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
Hickok AC51 tube tester
|
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
Who's Online
|
There are currently no members online. |
|
|