Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

38-15 Cabinet restored
#1

My 38-15 project is almost complete. Here is a couple before and after pics of the cabinet. Grill cloth isn't correct but it'll have to do at least its a Philco pattern.

Before:
[Image: http://i1129.photobucket.com/albums/m501...99f9c2.jpg]

After:
[Image: http://i1129.photobucket.com/albums/m501...5A8A44.jpg]

-Keith
#2

Nice work, Keith! Icon_thumbupIcon_thumbup
#3

Ditto! Icon_thumbup Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#4

Very niceIcon_thumbupIcon_thumbupIcon_thumbup

Steve

M R Radios   C M Tubes
#5

Looks almost new!!!! As it should. Great job.
Terry
#6

Thanks for the comments. It still has spots and a few dents in the wood I didn't want it up look factory new. I was able to remove or improve a few deep dents with a hot clothes iron.

I finished it up last night.

Link to the final pictures of the 38-15:
http://philcoradio.com/phorum/showthread.php?tid=5543

-Keith




Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM

[-]
Who's Online
There are currently 6132 online users. [Complete List]
» 1 Member(s) | 6131 Guest(s)
Avatar

>