Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

38-15 Cabinet restored
#1

My 38-15 project is almost complete. Here is a couple before and after pics of the cabinet. Grill cloth isn't correct but it'll have to do at least its a Philco pattern.

Before:
[Image: http://i1129.photobucket.com/albums/m501...99f9c2.jpg]

After:
[Image: http://i1129.photobucket.com/albums/m501...5A8A44.jpg]

-Keith
#2

Nice work, Keith! Icon_thumbupIcon_thumbup
#3

Ditto! Icon_thumbup Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#4

Very niceIcon_thumbupIcon_thumbupIcon_thumbup

Steve

M R Radios   C M Tubes
#5

Looks almost new!!!! As it should. Great job.
Terry
#6

Thanks for the comments. It still has spots and a few dents in the wood I didn't want it up look factory new. I was able to remove or improve a few deep dents with a hot clothes iron.

I finished it up last night.

Link to the final pictures of the 38-15:
http://philcoradio.com/phorum/showthread.php?tid=5543

-Keith




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3950 online users. [Complete List]
» 4 Member(s) | 3946 Guest(s)
AvatarAvatarAvatarAvatar

>