Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Hi, Hi, Miss Canadian Pye!
#1

Here is something that I should be getting in a few weeks, looks interesting, and the price was reasonable. It's a Canadian model Pye radio made in Ajax, Ontario. Don't worry though, unlike the Limey made Pye radios these don't use weird tubes.

http://cgi.ebay.ca/ws/eBayISAPI.dll?View...TQ:CA:1123

Regards
Arran
#2

Icon_thumbup
#3

For this kindaprice you can't go wrong.
#4

double post sorry.
#5

So I bought this Canadian Pye off the Bay.
I thought 5 bands with an 8" speaker was pretty good.
http://www.ebay.com/itm/Vintage-PYE-Mode...true&rt=nc

Gene
#6

So what happened to your Pye radio? I see it got relisted and then no bids??

Gene
#7

I'm working on a private sale with the seller, the biggest issue is how to get it to me, it's big, heavy, and not worth a lot, so spending another $28 on shipping was not really justified, especially if the radio got damaged on the way here. He listed it for sale again but the shipping exceeding the value is why nobody else wanted it, so no bids. I was going to get my brother in law to pick up as he was visiting the seller's area for New Years after leaving my place, but he left here with a full load after Christmas so no go there.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM

[-]
Who's Online
There are currently 3567 online users. [Complete List]
» 4 Member(s) | 3563 Guest(s)
AvatarAvatarAvatarAvatar

>