Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
It's really a beauty!!!! The cabinet is very nice except for the top where the finish is cracking. A little help from MR Mohawk and it will be looking good. I really want to here is bad boy play with it's dual speakers and P/P 6L6's. It has an RF stage and 2 IF amps so should be good in the hearing dept with good selectivity. It even has a fuse on the chassis next to the power transformer. Have a look!
http://www.flickr.com/photos/53710524@N0...hotostream
Terry
(This post was last modified: 01-06-2013, 08:02 PM by Radioroslyn.)
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Those twin speakers should have the house thumpin!!!!
Nice looking radio!!
Gene
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
So many nice, non-Philco radios on here this evening! I'm drooling! All very nice! 
No matter where you go, there you are.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
That's a model 1495. I think it's a 20 watt set!
Very nice!!! 
Posts: 4,810
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Be careful around that front control panel when you are refinishing the top. Until you determine otherwise assume that they used a faux finish on there, protect it accordingly with paper covered by plastic.
Regards
Arran
Posts: 37
Threads: 14
Joined: Jan 2013
City: MS, USA
That's a very nice radio!
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
After taking a better look at the diagram I noticed that it has one If amp and a AVC amp. Interesting set...
http://www.nostalgiaair.org/Resources/454/M0020454.htm
Terry
Posts: 141
Threads: 13
Joined: Sep 2011
City: moline, il
Very nice set. Unusual to see twin speakers on a later 30's set. Reminds me alot of the LaFrance. I am surprised it uses a 5 position tone control rather than a variable one.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The Wells-Gardner 2DL series often used two speakers. They were similar in many ways to your S.W.
You find the 2DL chassis in Coronado, Airline, Truetone, and, of course, W.G. sets. They range from 20 to 30 watts output.
Funny thing... with the exception of the Airline movie-dial sets that used this chassis, you often find them for VERY cheap. In fact, a Truetone model recently sold on eBay for 80.00!!
Posts: 4,810
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I don't really understand the run on movie dial sets in recent years, while the chassis within are undoubtedly good performers the cabinets are rather plain and boring to my eyes, even for private label sets. The dials, while the mechanism are somewhat of a novelty, aren't really that attractive, just a square hole with a black and white rear projected display. My Radiola 44 and Canadian Westinghouse model 89 look about the same, though what they have is basically a drum dial with number cutouts rather then a film negative.
As I mentioned before on another thread Stewart Warner is much like Sparton, they built some high quality sets and are largely overlooked aside from a handful of what I would consider novelty models. That Stewart Warner, for example, has a fuse on the power line, most manufacturers didn't bother with that feature.
Regards
Arran
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, that's true! RCA and AK are two other brands that offered a fuse in some of their sets.
Agree about the cabinet style of the movie dial sets. My 62-293 is not an inspired design.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Ermagarsh! I just showed it to my wife and it is now on top of the list of sets I don't need clearance to bring home. What a looker!
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Restore Code ??
|
| I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM |
|
Philco 91 Restore Code ??
|
| Yep. 10W is probably enough.
Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM |
|
Philco 91 Restore Code ??
|
| I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM |
|
Philco 91 Restore Code ??
|
| No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM |
|
Philco 91 Restore Code ??
|
| Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM |
|
Restoring Philco 96
|
| Well, selectivity today, with stations disappearing, is not such a problem for TRF as it likely used to be.
Although wh...morzh — 01:42 PM |
|
Philco 91 Restore Code ??
|
| Mike I did that already and can't really get any kind of reading. My little Honeytek A6013L reads 0 on all scales. One s...dconant — 01:38 PM |
|
New member
|
| Well, to be frank, when it comes to radios, especially the older types, a person with no electronic background could be ...morzh — 01:33 PM |
|
Restoring Philco 96
|
| Thanks for mentioning the video you had uploaded. Somehow I missed that post. Just watched your video, and it sounds to ...jrblasde — 01:28 PM |
|
Restoring Philco 96
|
| Joseph
well, for now we will have to get by the video I have made, as the final video would not be made before I get a ...morzh — 01:04 PM |
|
Who's Online
|
There are currently 3174 online users. [Complete List]
» 2 Member(s) | 3172 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
