Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

General Electric models A-205 & A-208
#1

    Are there any of these 20-tube monsters about?

One seldom sees the larger sets from GE. The 208 was the phonograph job.

Touted as a "True Fidelity All-Wave Radio", they had 6 (yes, 6) 6F6's in PPP output.

BTW, if anyone needs info, I have the factory service manual set covering all GE radios from 1930 to 1939.

Dennis

Pacing the cage...
#2

Just when you think that you've seen them all.....

I had to research that one, as I had never heard of or seen one before.

From the description it sounds like a monster.
#3

This model had rated 40 Watt output delivered to two 11" speakers.

It also used a unique switching arrangement to allow defeat of the superhet function and go to a TRF circuit (only on broadcast band), for ultimate wideband performance.

I have never seen any other radio of the age use this design.

The slightly later "A-205/8E" model was bi-amped, with 10 more watts for just the tweeters.

It probably gave the Strat and Masterpiece a run for their money in terms of sound.

Dennis

Pacing the cage...
#4

I have noticed that what you find or do not find in a given area largely depends on what dealer network was in your region when the set was made. In my area there was a regional distributor for Canadian General Electric and another for Philco, and there was a DeForest Crosley, an RCA, a Canadian Westinghouse, and a Sparton dealer in the area, so I see a fair number of those. I would bet that you would be more likely to see one of those big G.E sets in the New York/New England area or at least in an area that had a large G.E distributor nearby. I have seen some larger G.E sets but they are Canadian G.E sets, an altogether different animal.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
My last cabinet for this year
I have been pretty busy this year with cabinet stripping and refinishing.  So far I have done eleven cabinets   This i...Dan Walker — 09:06 AM
Identify Philco Radio
Here you go:  Roughly this is what the chassis looks like w/o all the extras. And it looks like your missing a nut.Radioroslyn — 08:57 AM
BC Resistor
Hi and welcome to the Phorum, Agree w/Dale. If you can check the resistance of the smoldering section you may find th...Radioroslyn — 08:54 AM
Identify Philco Radio
Hello,  Hopefully someone can identify this radio. The tube lineup is 2 - 77 tubes, 1 - 42 tube and 1 - 80 tube assum...dconant — 08:24 AM
Philco 29 or 45
Thanks for the info Bob. Looks like a have a 45 (no shadow). Stuffing old paper caps is a bit more than what I care to d...dconant — 08:05 AM
BC Resistor
As a rule resistors don't burn up for no reason. You need to diagnose what caused it to burn up. BTW, there are three...DaleHCook — 07:07 AM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Really, I used to get Setchell Carlson mixed up with Stromberg-Carlson, but never mixed up either one with Stewart Warne...Arran — 01:00 AM
Rebuilding a Rittenhouse RCM-3
Mike, Unfortunately Ron passed away and this site continues to grieve his loss and miss his incredible knowledge.NostalgiaRadioTime — 12:13 AM
Philco 46-480 Cabinet Restoration
I have since gotten the cabinet stained and toned. I saw a video online of another guy renovating a 46-480, and he used ...jrblasde — 07:37 PM
Rebuilding a Rittenhouse RCM-3
Ron - hi, any chance you can discuss the Rittenhouse RCM-3? I know it is 10 years since you did the post. I have one of ...mtk212 — 05:28 PM

[-]
Who's Online
There are currently 2512 online users. [Complete List]
» 3 Member(s) | 2509 Guest(s)
AvatarAvatarAvatar

>