Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco call letter tabs
#1

I need to replace the tabs by the pushbuttons on my 41-300.Some where pushed way in and one is missing.[ I'm not sure what these things are even called] but they show station call letters by the pushbuttons.like
WGN WIND WLS WBBM. One of them even says TV. I don't know what that was about. anyway I'd like to find a good replacement for them.
thanks.have fun Icon_biggrin
#2

Hi Billvet6,
You can get NOS station call tags on ebay, ex: http://cgi.ebay.com/6577517408

(yes they are Ze----, but you can find official Philco one sometimes too) OR you can make your own, I made some up in MS Word, print them out, spray krylon flat clear on both sides of the paper, then when dry, just cut them out.

I think thats what you were refering too??
take care,
jerry.
#3

thank you for the reply. I will check that out.
#4

Bill,

I think I have some full-size scans of the tab sheet set of 6 pages for a 1942 set somewhere. Can't remember if the color scans are jpegs or pdfs. Once I find the tab set, I'll post here.
#5

thanks Chuck
#6

Found the six jpegs. Each is about 700K in size. Can your email handle 700K attachments? WIll send individually.

Here is a thumbnail of one of the sheets.

[Image: http://www.philcorepairbench.com/images/smalltabs02.jpg]
#7

I don't know. Wish I had asked this question before I sent the check for the papers for the 41 300 from you. These are exactly what I am looking for. Ill certainly try. Thank you so much for the help.
Bill
#8

Will send you the first sheet via email attachment. Let me know if it's ok. If your end has fits, then I'll print out the files on laser and mail to you. Still have your address. No problem. Icon_smile
#9

thanks again Chuck
#10

Chuck
I haven't been able to print these labels. I think our printer has quit.
Bill
#11

Just sent the files to myself at work where I have a nice colour laser (non-smudging when cutting and insert tabs) and will mail them to you on Monday Bill.

Happy Holidays! 8)
#12

I realy thank you so very much.Bill Icon_biggrin
#13

Sooo..... anybody got the tabs that fit the mystery control?
#14

Just caught this thread and find myself in the same boat! Would you be kind enough to email me the call letters? I have a 39-55 that needs numbers. Also, just acquired a 41-300. Will your call letters fit in the push button models?
#15

hyounce Wrote:Just caught this thread and find myself in the same boat! Would you be kind enough to email me the call letters? I have a 39-55 that needs numbers. Also, just acquired a 41-300. Will your call letters fit in the push button models?

I need the same thing!!




Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM

[-]
Who's Online
There are currently no members online.

>