Question About Wards Airline Radio
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
Beautiful radio Mike! I really like the full vision dial combined with the two smaller dials and that's a beautiful cabinet too, congratulations.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Thanks, John. I have a friend who lives in the Ann Arbor Mi area who surprised me with this radio. He found this at an estate sale and he doesn't usually attend those. It'd been in the same family since they purchased it in 1932. I'd have posted the picture but I've been busy with work and especially the last ~24 hours shop-vac'ing rainwater from my basement.
And thanks Ron for posting the pictures.
Mike
(This post was last modified: 01-30-2013, 10:30 PM by Michael Dennis.)
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Thanks TA. I have a 1934 Clarion with a similar dial I picked up, lesse, was it October? Haven't gotten a picture of that yet but it came with one globe blueglass Arcturus tube, the rest being variuous manufacturers ST type tubes. I thought the blue Arcturus pretty neat. When the hectic hubub subsides a bit I'll snag a frame or two of that radio.
Mike
Posts: 141
Threads: 13
Joined: Sep 2011
City: moline, il
Hi Mike-That is a fine looking set. I really like the wood relief trim.
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Hi Bruce! Long time no hear! How the heck are ya?
Thanks, that trim does look rather sporty. A friend in Ann Arbor kinda surprised me with this one. I googled and found one that was undergoing restoration. Apparently there's a lighted line pointer that moves behind the stationary dial. Never seen one like that before, but then until 2008 I had been away from the radios for a 30 year hiatus. Always good to hear from you!
Mike
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
An impressive looking set! The thought just jumped into my head looking at the Airline next to the Zenith.........Obiwan Kenobi next to a starship storm trooper........
Gene
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Wow, never even thought of that. Great analogy. I guess it could've as easily been the Zenith 10S470 or the 10S464 next to the Airline, they're a bit further to the left along a line of five consoles and one chairside. The grey wood behind them are cabinet doors. The multiple pinholes near the drawers are where my brother and I used to miss the dartboard as young infink miscreants.
Mike
(This post was last modified: 02-06-2013, 10:10 PM by Michael Dennis.)
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
As opposed to an "old infink miscreant?"
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
![Icon_lol Icon_lol](https://philcoradio.com/phorum/images/smilies/icon_lol.gif) Yes, that's what I am now. Not ashamed of it either!
Mike
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Me too. In fact, I am cultivating it, and am now known as THE Miscreant.
I used to call my daughter "Miss-Information," and still do when I want to once again experience her exploding into a pile of body parts on the floor, with a head on top going "AHHHHHHHHH!!!!!"
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
It's a pleasure to fellowship with a fellow miscreant. My hat's off to you, sir! There's a lot of joy in cultivating a talent that one enjoys, isn't there?
And knowing which buttons to push, re: your daughter, is a valuable adjunct I have to admit.
Mike
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Nnnyesss, it is, isn't it?
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
Who's Online
|
There are currently 3944 online users. [Complete List] » 3 Member(s) | 3941 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|