Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I think I'll pass on this one...
#1

Over the weekend, my wife and I did some antique shopping, and in one shop I saw a Philco 37-38 shouldered tombstone battery radio.

Here's what was done to it - the photo finish was completely stripped off (looked like plywood!), the grill cloth was replaced with something that was purple burlap, and they wanted $80 for it!

At least it was marked down from $100 to start.

No thanks. Icon_sad

Bill

Sent from my Pentium II on the AT&T Dial Network
#2

You could have asked them if there was a typo on the price tag, as in $80 instead of $8. Icon_razz

--
Ron Ramirez
Ferdinand IN
#3

Antique stores never cease to amaze me. A lot of them seem to think because something's "old", it has to be worth a fortune. I'd say the biggest laugh I ever got at an antique store was a late '40s GE AA5 radio (nothing special) with a $300 price tag on it. Of course this was up around the Washington DC area.

Tom
#4

I forgot to mention - it was also mssing 2 knobs, and one of them was the tuning dual knob!

$8 would have been a fair price for it. The cabinety issues were obvious; who knows what evil lurks in the heart of the chassis? Icon_twisted

Although, if was as low as $20, I would have started thinking about it, but only then. (I'd have taken it for $15!) Icon_eek

Bill

Sent from my Pentium II on the AT&T Dial Network
#5

Get out the handkerchief, guys!

There's a flea market hereabouts that I go to a lot. A few years ago I happened to look under a table in the outside area, and recognized a Philco shoulder tombstone with a rather obvious 16/116 chassis, looking at it from behind. I looked at the front , it was a '35 vintage 16. How much, I asked? Ten bucks, he said. I didn't want to waste time negotiating, so I paid his price. I did restore it, and let it go, as I already had one.

Some times, you just have to pay the price!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently no members online.

>