Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-84 restoration
#1

Well, friends.
The restoration has finished. You know how it got this radio to my hands. This was very poor on the front.
[Image: https://dl.dropboxusercontent.com/u/7295...15post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...orpost.JPG]

The problem was getting the typical photo finish, in the early thirties. Without this the radio will not get to have the look of his time.
Luckily, my friend Terry of the Phico Phurum, send me a scan of your Philco 37-84. He sends me in two parts because it was impossible to do a full scan.

[Image: https://dl.dropboxusercontent.com/u/7295...l1post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...l3post.JPG]


Now the job is to unite the two parts, using software such as Photoshoip and Ilutrator.The mission is to get one piece and that the lace pattern.
[Image: https://dl.dropboxusercontent.com/u/7295...ucpost.jpg]

We print on thin paper digital image. Using a glue dissolved in water, got hit the paper layer on the front. As you can see, we have a uniform image, cloning the colors. So, once attached to the front we cut the holes in the speaker grille and knobs.

[Image: https://dl.dropboxusercontent.com/u/7295...t2post.JPG]

And we began to cut
[Image: https://dl.dropboxusercontent.com/u/7295...r1post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...3print.JPG]

finally cutting has finished
[Image: https://dl.dropboxusercontent.com/u/7295...r5post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...r4post.JPG]
#2

Looks like you're on the way!!Icon_surprised
#3

Icon_thumbup

Beautiful! Just like a brand new 37-84B!

--
Ron Ramirez
Ferdinand IN
#4

OutstandingIcon_thumbupIcon_thumbupIcon_thumbup

Steve

M R Radios   C M Tubes
#5

Here you can see pictures of the radio already completed
[Image: https://dl.dropboxusercontent.com/u/7295...01post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...41post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...31post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...71post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...91post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...11post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...31post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...21post.JPG]

You can see more photos in the Picasa album.
This is the limk
https://picasaweb.google.com/10453952194...co37841936
#6

Mine just sez (image philco post 101 jpg) where a pic should be???
Terry
#7

Finally my old laptop started working and it came up with the pics. Gosh the front looks just like my 37-33!! Great job!!
Terry
#8

Very nice job!!Icon_thumbupIcon_thumbup




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
Morzh is correct. The repair bench on our website is an archived image of chuck’s original site. He no longer provides s...klondike98 — 05:32 PM
Made mistake & did not label connection
Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM

[-]
Who's Online
There are currently 4473 online users. [Complete List]
» 2 Member(s) | 4471 Guest(s)
AvatarAvatar

>