Posts: 2
Threads: 1
Joined: May 2013
City: Sarasota, FL
Hello all, I am new to this forum, so please bear with me if I seem unknowledgeable about Philco radios. My Father was sort of a electronic geek from the 40's. I remember he had an old zenith TV in the basement that took about an hour to warm up and the screen was about 4"x4", but he kept the danrned thing working. I think he gave it away to someone before he moved to FL 20 years ago (sigh, I wish he had kept it!). Any was he passed away a few years back and I've been going through the stuff in the garage and I found an old Philco mystery remote. I have found some things about it in general online, but this one in particular has me stumped. The serial Number on the back of the unit is 5 N 011820. I can't find any corresponding numbers to match this online. On the inside there are 2 part numbers: 10350-A on side of box, and 38-9704 on the flywheel/gear bracket. The box is also made of wood, unlike others I've seen mentioned online. Can any one give me any clues as to when this was made? How much it could be worth?
Thanks for any help.
t_bombadil@comcast.net
TJ
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hi
You will find a great deal of information on Philco Mystery Control at Chuck's site:
http://www.philcorepairbench.com/mystery/
All of these have wood cabinets with Tenite plastic dials.
These do not have individual model numbers as they were sold with the corresponding radio. The "10530-A" is the part number of the cabinet. I have a little info on that at home, but only about the cabinet itself, nothing technical. For technical info, see the link to Chuck's site above.
--
Ron Ramirez
Ferdinand IN
Posts: 2
Threads: 1
Joined: May 2013
City: Sarasota, FL
Thanks for the info, I have visited Chuck's site, I was just confused by the different numbers. Thanks.
Posts: 4
Threads: 0
Joined: Feb 2015
City: Minnesota
Members,
I am trying to get in touch with (Cash or Chuck) I bought a Philco Mystery Remote Control off of E-Bay & it is Missing the Battery Pack with 3-Prong Plug In. I replaced the #30 Tube. I've tried for 3-Day's to send an E-Mail to (Chuck) and it don't go through at all. I do not know how to use the Internet very good at all.
I have to use my I-Phone 4S because it has to be a Touch Screen. I am 64 Years Old & took care of my Mother for over 16 Years at Home. I am also Legelly Blind 20/400. I've tried a Computor with a Mouse & Screwed it up so gave up on them. So is there anyone who can help me get in Touch with Cash or Chuck? Every time I try to send an E-Mail to Battery Maker it goes to other People I can't seem to figure out to get in Touch with Chuck Directally. Could someone else help me out? I'd really appreciate someone out there that could help me out & telephone Number for Chuck.
Thank You.
Ron
Posts: 5,088
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
TJ...welcome to the Phorum!
Ron..welcome to the Phorun! Chuck will probably see this post. I do not know Cash.
Posts: 4
Threads: 0
Joined: Feb 2015
City: Minnesota
Ron,
Here again I forgot here is my E-Mail address to Contact me. & Phone Number
germanshepherd3944@gmail.com
701-730-2948. I got over $70.00 in the Mystery Remote already and people keep sending me to the Wrong Person For the Battery Pack. The one I want is on Chuck 'a Site the Blue & Yellow Color Front with Philco's name on the Front. The Back of it is Blue Color.
Thank You.
Posts: 15,832
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Is the Chuck our Chuck or is it some Chuck from eBay? In the latter case you are the only one who can contact him through eBay.
And who is Cash?
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
hey guy`s think he just means chuck
chuck will contact you
you can click this link to pm battery-maker
will take a day or two before he contacts you
http://philcoradio.com/phorum/private.ph...end&uid=11
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Ron,
I believe you are looking for a fellow who goes by batterymaker. He specializes in batteries for Philco Mystery controls. I sent him an e-mail with your contact information. Below is his e-mail:
[email= batterymaker@gmail.com]batterymaker@gmail.com[/email]
And I think his ad is located here on Chucks site:
http://www.philcorepairbench.com/links.htm
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
(This post was last modified: 02-14-2015, 03:33 PM by Eliot Ness.)
Posts: 4
Threads: 0
Joined: Feb 2015
City: Minnesota
Ron,
I'll give everyone all the Information I have to help me Locate Chuck for a Battery Pack.
His Video is on (YouTube). I think I Typed in who can Repair a Philco Mystery Remote Control or where can I Purchase a Battery Pack for my Philco Mystery Remote Control. One name I get is (Cashwark). But I'm sure it is Chuck?
It is the very 1st Video on YouTube about that Chuck makes them from Scratch it uses (2) C-Cell Batteries & (5) 9-Volt Batteries. The Guy made a Wooden Case for them & the Cover just Lifit's Off. The Battery Cover is Carboard that is Yellow & Blue in Color & Has PHILCO in Big Letters on the Top. The Back of the Battery Pack is Carboard in Blue Color. And on Top is a 3-Pin Plug In to match the Other End inside my Remote Control. This is about all the information I can come up with.
Please any Help would be appreciated.
Thank You.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Yes, that is batterymaker and as I mentioned above I sent him your contact information. Below is a link to his video:
https://www.youtube.com/watch?v=z-zMDYWwf70
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 4,707
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
That's Bill Morris, he used to make reproduction battery packs but I don't think he is in the business anymore, at least not for ready made battery packs.
Regards
Arran
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
arran
is right he does not make them
but he is very helpful and tells you how to make them
they are not that hard really
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4
Threads: 0
Joined: Feb 2015
City: Minnesota
Member's
I bought a Philco Mystery Remote off of E-Bay. & I've been trying to Contact Chuck with no luck. I am Legelly Blind 20/400 & I need someone to make it up for me. The Video was on YouTube it is the 1st Video I not that Smart to make it myself. The Battery Pack uses (5) 9- Volt Batteries & (2) C-Cell Batteries & has a 3-Prong Plug In. The Box is made out of Wood. And there is a Carboard Cover on top that is Yellow & Blue Color With Philco in Large Lettering & the Back Carboard is Blue Color. So I need People's help to get this information to Chuck my Personal Information is below. It was Originally Posted 2-14-2015. Any help in geting Chuck to contacted would be Appreciated. Thank You.
Ronald Hofmeister
germanshepherd3944@gmail.com
701-730-2948
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Ron,
Hello again. I replied to you a few days ago last week regarding contacting
Bill Morris, aka BatteryMaker, through the email contact in my Resource Links
page on my website, and also that I do not take on repairs of any kind.
My website is an informational site for technical info for collectors to do
their own repairs and restorations.
It seems now, from comments of others here that he no longer makes reproduction battery packs.
Unfortunately, that's all the help I can give you at this point Ron. I do not make these battery packs and
I know of no one else who makes these packs.
Chuck Schwark
The Philco Repair Bench
Users browsing this thread: 6 Guest(s)
|
|
Recent Posts
|
|
Philco 60 Squealing
|
| Well, a wave trap is a trimmer in series with the coil so at the resonant frequency it provides a short to ground. This ...RodB — 10:07 AM |
|
Philco 60 Squealing
|
| Rod, My radio is run 7. The wave trap is on that schematic as shown in the picture.
dconant — 09:21 AM |
|
American Bosch Model 802 auto radio
|
| Hi Arran ,
Thanks for your help with this radio.And especial thanks for letting me know to look it up under United Ame...Antipodal — 04:32 AM |
|
Philco 60 Squealing
|
| Usually a wave trap is for keeping IF signals from entering the antenna and from leaving the antenna. You feed an IF sig...RodB — 09:30 PM |
|
Philco 60 Squealing
|
|
I just peaked it for the best signal at 600.
NULL it for IF frequency, originally it would have been null for 500kh...Chas — 08:05 PM |
|
Philco 60 Squealing
|
| Wavetrap no longer matters.morzh — 05:19 PM |
|
Philco 60 Squealing
|
| Rod, I had checked out your suggestions but did not help. I did solder the ground rivets to the chassis as Chas suggeste...dconant — 04:52 PM |
|
37-690 Bass Choke Replacement
|
| Yeah, I know, Mouser and Digikey don't have "big iron" components. For some reason Philco was messing with the...Radiodial — 04:25 PM |
|
37-690 Bass Choke Replacement
|
| Yes, I just had to deal with that while repairing the 37-604 Philco. Exactly that value choke was gone. And the current ...morzh — 03:52 PM |
|
37-690 Bass Choke Replacement
|
| Ah, now where to find one.
I've into this before on smaller sets, I now recall. Hammond makes one that is only rated...Radiodial — 03:27 PM |
|
Who's Online
|
There are currently 3157 online users. [Complete List]
» 1 Member(s) | 3156 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
