Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
http://s1194.photobucket.com/user/TAForb...son%20180L
Found in VA. Decent condition, but clear coat gone in a couple of places.
This is a seventeen tube set, PP 6L6s diven by two 6F6s. (one 6F6 is bass-boost amp, it's plate is connected to the driver 6F6 plate.
All controls appear to function properly. This is a nice "encore" after recently finding a 12S471 locally.
Here is a better of the whole front of the set. FYI the doors are open to display the conrtol panel.
http://i1194.photobucket.com/albums/aa37...80L005.jpg
(This post was last modified: 05-04-2013, 02:59 PM by TA Forbes.)
Posts: 4,810
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
What a beast! You know Stromberg Carlsons are like RCA and Sparton sets, they are often overlooked, which is good because it keeps them affordable.
Regards
Arran
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, thanks, it is that!
Funny thing, the Strombergs seem to have a cult following. Those who love them have reacted like you, those who don't are unimpressed.
Judging by the circuitry I would have to agree that it is similar to the RCA line in that they used a four-gang tuning cap and LOTS of caps/coils/xfrmrs to maximize the reception/selection. I also like the additional AVC and bass circuitry that is above what is normally seen.
A friend of mine who is into them and actively seeks them out stated that he has never seen another one and believes that they are a low-production model. But again, I have no info on that.
I have only had a couple of them in the last 40+ years and the ones I had I sold or traded soon after I got them. But this one I may end up keeping. I'm a sucker for lots of tubes/bands/bass boost/watts output.
I believe that this was their top-end set for 1936-37, but info about them is sparse at best.
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
Very impressive looking set! Stromberg-Carlsons are definitly not common around my area at least.
No matter where you go, there you are.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Nothing is common around here.
That must be a loud radio.
249
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, thanks, agree that it should be a loud one.
The 6F6 drivers had 405V plate voltage on the 6L6 tubes leads me to believe that it is an AB1 or AB2 amplifier. If so, the potential output ranges from ~ 20 to 40 watts. ![Icon_biggrin Icon_biggrin](https://philcoradio.com/phorum/images/smilies/icon_biggrin.gif) ![Icon_biggrin Icon_biggrin](https://philcoradio.com/phorum/images/smilies/icon_biggrin.gif)
Oh yes, it also has an ST-shaped 6E5 eye tube.
Posts: 6
Threads: 2
Joined: Apr 2010
It was just my birthday (hint hint) it's never to late for a great present you the man!!!!!!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 4,408
Threads: 415
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
That dial is a beaut. Stromberg Carlson was out of Rochester NY. Made Telephone equipment and did a lot of that for the Government. Their build quality is very good. I have a couple of consoles, I have a little 6 tube job from the 40's they made, it weighs 3x most sets it size and is a great little performer.
I would take it, where did you put these monsters?
Paul
Tubetalk1
Posts: 5
Threads: 2
Joined: May 2013
City: Santa Fe, NM
Indeed. Stromberg-Carlson does have a cult following--though how many people constitute a cult is open. I have a Model 1121, Series 14 that I've had since I was fourteen (almost fifty years). Does anyone know where I can get an accurate schematic for this. There are plenty of schematics for Series 10,11,12, but Series 14 seems to be a rare bird.
Thanks.
MD
Posts: 462
Threads: 40
Joined: Jun 2010
City: Lehighton
State, Province, Country: PA
Beautiful S-C! I have a 535M and I agree, they are very well made.
Larry
Posts: 16,253
Threads: 565
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I've been wantin' a S-C for the longest time.....
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Must be my time for Stromberg sets. Just located a 935M up home in NY and am going to take a look when I go there next month.
Posts: 16,253
Threads: 565
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I wanted their ""strato-world"", was it? Their "transoceanic" version. Let couple go, then could not find anything decent below 300 bucks.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Oh yes, the Strombeg "T.O." is tough to find and usually expensive when you do find one.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
New member
|
Hi. I specialize in refurbishing Predictas, but I'm in Chicago. If you can get it to me, I'd be happy to go over it. ...Bob Andersen — 06:43 PM |
An attempt to remove the Field Coil from a G speaker
|
I have 3 G speaker, all with open Field coils.
Today I pull one of the shelf and decided to try to remove the FC (spo...morzh — 06:07 PM |
Philco 91 Restore Code ??
|
Thanks Mike. I will check them out.dconant — 05:52 PM |
Philco 91 Restore Code ??
|
There is no such thing as bad Fluke.
This said, they are expensive. A Fluke is easily 10x the price of comparable CCC...morzh — 05:45 PM |
Philco 91 Restore Code ??
|
Hello Mike,
Yes, I have 3 Fluke meters one being my first Fluke 77 and other being Fluke 87.
My third is Fluke clamp -...radiorich — 05:04 PM |
Philco 91 Restore Code ??
|
I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM |
Philco 91 Restore Code ??
|
Yep. 10W is probably enough.
Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM |
Philco 91 Restore Code ??
|
I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM |
Philco 91 Restore Code ??
|
No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM |
Philco 91 Restore Code ??
|
Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM |
Who's Online
|
There are currently no members online. |
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|