Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

39-55 cabinet light question
#1

I noticed on my 39-55 cabinet when I bought it there were two holes in the front. One, of course was for the knob for the door over the controls. At first I was disappointed as I thought the knob was lost but found it wedged between one of the front pillars and the grille clothIcon_clap! I didn't know what the second hole in the cabinet was for until I removed the chassis and found out there was an indicator lamp mounted in there. i suppose it was for letting the user know if the power was on with the cover closed. Anyway, my question is, is there some sort of lens cover that mounted over the hole? I can't tell from the pictures in the gallery. If there is one, does anyone have any pictures of what it looks like? Thanks!
Kevin
#2

I use to have those remote controlled radios and it did have a light there it was a different model don't remember witch one wish I would have kept it.
#3

Hi Kevin,

This YouTube video shows a 39-116RX with a working mystery control. The red light you refer to is shown working fairly clearly:

http://www.youtube.com/watch?v=siWbRMSYBcc

Greg V.
West Bend, WI
Member WARCI.org
#4

I think that there was a small plastic jewel lens mounted in that hole. I don't think that they were anything that fancy just a plain red plastic jewel. I had a G.E radio/phono combination unit from the early 40s and it had a similar sort of lens mounted in the skirt bellow the speaker grille, it was kind of necessary since the control panel was hidden behind a door.
Regards
Arran
#5

Thanks Greg for the You Tube link! It was neat seeing how the mystery control sets work! I guess I'm going to have to look for that lens.
Kevin




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Zenith H725
Ed; One thing that I will say about these is that Brand Z was considerate enough to make these mica caps easily acces...Arran — 02:34 PM
Philco 610B oscillator wiring
Do you know what run # your chassis is? It took me a while to find what you were basing updates/modification on as I did...Radioroslyn — 07:34 AM
Need to purchase some accessories for restoration of my Old Philco Radio
COLLEAGUES, Thank you all for such good and important suggestions as how to find good replacement parts. I will go fo...palonso — 07:05 AM
Zenith H725
Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM
Zenith H725
IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM
My Philco 37-116 Restore
Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM
My Philco 37-116 Restore
Are you measuring relative to the centertap or the GND?morzh — 11:57 PM
Philco 610B oscillator wiring
Still not clear on the wiring interface between the 6A7 and oscillator. After refering to the available schematics and s...Tubester — 07:18 PM
Refinishing Ideas
My 37-116 code 121 is the best sounding radio i have...a daily driver. Since we are talking about "changes". ...poulsbobill — 07:18 PM
My Philco 37-116 Restore
Hello, I finally got brave enough to take the cans off the Expander Unit. Got the grid cap wires replaced and back toget...dconant — 06:50 PM

[-]
Who's Online
There are currently no members online.

>