Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

radio philco modelo 20
#1

hello friends
I bought this radio about two years ago on ebay regular wood furniture I am restoring and I'm doing a course, furniture restoration was done mixed cable and change all valves are turned on, but I have a big problem that I missing radio speaker I've seen in pictures the speaker type has a cable leading to a kind of plug where it connects behind the radio, please anyone know where I can get these speakers as I do not know where to get them from Spain by Please ask your expert help rookie mine, greetings.
I am new to the forum, and I thank the enorabuena for that space.
#2

Hi and welcome to the Phourm!!
Well we are actually in the wrong section so we will probably get moved to electronic Restoration.
What you are looking is even hard to come by here in the states too as it hasn't been made since 1931 or so.
There are two ways to go.
Try to find an original one, they do show up on ebay from time to time.
Or you can build a speaker that will work. You will need a 8" PM speaker, a suitable matching transformer, 10H 100MA choke, and suitable cord and connector.
GL
Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM

[-]
Who's Online
There are currently 6055 online users. [Complete List]
» 2 Member(s) | 6053 Guest(s)
AvatarAvatar

>