Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Looking for a grille cloth Philco 84
#1

Dear Friends,
I'm looking for a grille cloth for a Philco 84.
Where can I find a grille cloth like this? I put some pictures of the old grille of my radio.
[Image: https://dl.dropboxusercontent.com/u/7295...o1post.JPG]
[Image: https://dl.dropboxusercontent.com/u/7295...o2post.JPG]

Thank you,
Carlos Sempere
#2

I would look for upholstery that looks similar. Vintage grill cloth prices are ridiculous.
#3

Radio Daze seems to be reproducing the Philco Model 70, 90 grill cloth which appears to be what you have. Here is a link:

http://www.radiodaze.com/product/40030.aspx
#4

That works out to $108/yard BTW.
#5

I used this on my Model 90, not original but close, looks good, and decent price.

http://www.ebay.com/itm/Radio-Grill-Clot...3cce0ca1fb

Here is what it looks like on the 90:

[Image: http://wl.filegenie.com/~yowboy/yow90.JPG]
#6

The stuff at Radio Daze is about the right color, but that is it. Too bad, that pattern was used an a lot of other radios as well.

And, like I said before, nice cat. Looks like our Wooly.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#7

I'm sorry but that doesn't look right to me at all. In these days of 3D printing there has got to be a way to get these right. Most of the "vintage grill cloth" on eBay is nothing more than repurposed stock fabric. I had to buy a double order of this one, which really looks like it would be more at home on a chair than on the front of a radio: http://cgi.ebay.com/ws/eBayISAPI.dll?Vie...0970742909 It was the only fabric I could find with a diamond pattern, but since it is called grille cloth, it goes for over $100 a running yard.
#8

The guy selling that is a running joke around here anyhow. I nicknamed him "Foggy" because every make and model of radio he refinishes gets the same two tone treatment, like a cheap guitar from K-Mart, and crappy upholstery cloth in the speaker grilles. To make matters worse he then sets his team of shill bidders to work on anything he has for sale.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM

[-]
Who's Online
There are currently no members online.

>