Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Best performing Philco Tombstone on SW
#1

Having had many 30s Philco Tombstones and cathedrals during the last 35 years I am Curious of others opinions. My best performing set all round was the 16 code 125/126. Would like to hear others opinions
#2

Agree on the 16-125/126/127, which is the four band set with an RF amp as well as two stages of IF. I would rate the 116B (121) and 116X (122) up there with the four-band 16, as there are only minor differences between the two, chiefly the addition of long wave in the 116.

--
Ron Ramirez
Ferdinand IN
#3

116x? not familiar with it, difference between it and the 116b?
#4

Sorry, the 116X is a console so it is outside the scope of this discussion. (I should pay closer attention before I type.) Icon_redface

http://www.philcoradio.com/gallery/1936a.htm#j

The 116X uses 6A3 output tubes and a slightly different tone control circuit. The 116B uses two 42 output tubes, like the 16.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently 1637 online users. [Complete List]
» 1 Member(s) | 1636 Guest(s)
Avatar

>