Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Restoration of UK Philco 282 Empire Five
#16

Now, with the proper dial lamp holder in place, I moved the other lamp bracket so it can be used as a lamp for the shadowmeter in the 282.

[Image: http://philcoradio.com/images/phorum/282...ive/16.jpg]

[Image: http://philcoradio.com/images/phorum/282...ive/17.jpg]

--
Ron Ramirez
Ferdinand IN
#17

Now, once again listening to AM 740 from Toronto. Only now, light is coming through the shadowmeter for the first time in who knows when.
I still need to replace the rubber mounts on the 282's tuning condenser. And once the weather warms up again, I will probably give the chassis a good cleaning.
Now the the shadowmeter is illuminated, I have discovered that the vane does not move. Nice. It has continuity but isn't working.
Oh, well. I am going to set this one aside for awhile and move on to another project.

[Image: http://philcoradio.com/images/phorum/282...ive/18.jpg]

--
Ron Ramirez
Ferdinand IN
#18

Nice write up Ron, I am going to have to replace the gromments on the 582 and it will need a speaker, its next on the restore list.
#19

What brand are the tubes (valves) and where were they made




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently no members online.

>