Restoring my 37-116. It plays now!
Posts: 1,108
Threads: 89
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
I've personally found that (soaking in) Simple Green does wonders for knob residue. A toothbrush, applied while the knob is still wet, will get any stubborn leftovers. I've done this many times, and the knobs come out looking like new.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
6J5 is about as simple as it gets. Metal version must have pin 1 to ground with no other ties of convenience, glass versions may require shield. 6C5 can sub if you have one 99%.
Posts: 15,825
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Looks Good! Big improvement!!
Terry
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Very nice example, Mike!! And with the 6A5 output system!!
Posts: 15,825
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
AND it sounds like that with OLD WEAK (officially weak according to the tester) 6A5 tubes.
And I did buy the new ones off of Bob Dobush! I thought the originals would work but bought the newer anyway just in case.
(In fact I had to change just three tubes, two 6J5 and the rectifier.)
They sound terrific!!!
Well, now I need to take that oatmeal residue off and then try some of that "Wine'n'Dine" or "Feed'n'breed", forgot which one it is....supposedly it will rid me of the necessity to do the full resto one day, and, what's better - of thinking of it
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
(This post was last modified: 09-08-2013, 09:07 PM by TA Forbes.)
Posts: 15,825
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Really? What do they use to hold the rugs? And do they cover themselves in GoJo first and then rub against the radio?
Gosh, I'd love to see that!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yep! Really!!
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Morzh, that radio is looking great! Good job! ..
The artist formerly known as Puhpow! 8)
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Great looking radio......Job well done another one saved and able to sing again give yourself a hand!
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
'Tis but an far cry from "whence it was". glorious!!!
Posts: 15,825
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Oh' c'mon guys, you make me blush - I just cleaned it with GoJo....any one of you would make this cabinet orders of magnitude more gorgeous.
It's just the radio is so beautiful it looks good even without proper cabinet restoration.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
OK.... I guess that means you don't want the "candy-gram" I was having the Rutgers Bikini-Radio-Washing Team deliver to you
Posts: 479
Threads: 73
Joined: Mar 2012
City: Riverside, CA
Users browsing this thread: 4 Guest(s)
|
Recent Posts
|
Philco 60 Squealing
|
I seem to remember eliminating a squeal by changing the IF frequency by a few KHz. Not that you should put too much tru...fenbach — 08:48 PM |
Philco 42-390, code 121 speaker
|
These speakers pop up on eBay regularly, even if at bloated prices.
Honestly, have not seen many parts on swapmeets.morzh — 08:38 PM |
Philco 38-7 Speaker
|
The put-put is not like the speaker problem.morzh — 08:29 PM |
Mission Bell Model 19A Car Radio
|
Hello everyone,
As mentioned in my last post I was going to see if the vibrator / rectifier section could be persuaded...Antipodal — 08:21 PM |
Philco 60 Squealing
|
Wondering if I did it backwards.
If a coil was wound backwards, the oscillator would not work at all.
Old school...Chas — 07:23 PM |
Philco 38-7 Speaker
|
4-ohm speaker. Black, Green leads.tludka — 07:00 PM |
Philco 42-390, code 121 speaker
|
#87 on the schematic.
This radio had a 8" Zenith speaker attached to it when I got it. I do don't know the hist...Stevelog — 06:39 PM |
Philco 60 Squealing
|
I'm pretty sure I now have the litz wire soldered. This did not make any difference. Back in April I rewound the seconda...dconant — 06:25 PM |
Philco 38-7 Speaker
|
Just to make sure, you chose either 4 ohm into 5K or into 10K? (blk-org or blk-grn)morzh — 06:23 PM |
Philco 38-7 Speaker
|
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM |
Who's Online
|
There are currently 5527 online users. [Complete List] » 1 Member(s) | 5526 Guest(s)
|
|
|
|