Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
http://www.flickr.com/photos/53710524@N06/9735661827/
Just picked this old guy form a friend of mine. Had to do a little talking but he was very generous and it followed me home. I'm really surprised at how heavy that little back ache in a steel box is. Must be 60 pnds or more!
Terry
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Hummmmm.. Why did they make this radio cabinet out of steel? Does anyone have one in their collection? And if so how do they sound? I do not know if I would be so interested in buying one..
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Heck of a lot easier to do the finishing work on and it's cheap. All I can tell you is you better wear a doodad protector if your going to pick it up!! I had one years ago, it was a brown wrinkle job with a single 71 in the audio think it was a 52 ( this has P/P 71's) Best I can remember it use a cone speaker like the mdl 40. Sounded like a model 40. This set has a dynamic speaker so it should sound pretty good for 1929 technology. Between the larger power supply and the electrodynamic speaker it's a killer to move.
Terry
(This post was last modified: 09-14-2013, 09:48 PM by Radioroslyn.)
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
Now it seems like these "old stoves" are coming out of the woodwork lately. Keep on cookin'! 
Posts: 15,810
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
Terry
This is an A-K, right?
PS....oh, OK, saw the photo title, yes AK61.
Naaaaiiiiissss!
(This post was last modified: 09-13-2013, 09:12 PM by morzh.)
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Nice! Now I just hope one of those appears in my area sometime soon! 
No matter where you go, there you are.
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
Nice 1929 Atwater Kent model 53! I have a 1928 AK model 52, which is just slightly different.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Is that your utube video??
Terry
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
nice one terry ill be eyeing that one next time I come over 
Posts: 262
Threads: 27
Joined: Jan 2010
City: Rochester, NY
Hold on to yer doo-dads!
Those babies are heavvvy!
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Had a little time to kill so I took a look at the AK53. Did a cursory checkover. Found that set is DOA after installing a new CC line cord. Tube filaments OK P/S OK too. Driver transformer open secondary. P/S has some Extra caps add to it. Will have to figure out what is going on there.Seems like there maybe an open resistor in the P/S as all voltage seem very high.Also checked the FC and it's fine!! Oh and the grid leak is open Surprize!!!. Will run over to Stinko's and make some XL prints of the diagrams old peepers any what they use to be.
Terry
Posts: 395
Threads: 33
Joined: Jul 2013
City: Horsham, PA
Hi Terry,
How big is that thing? Hard to get a measure of it from the picture.
Jon
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
23"tall 18"wide and 11"deep.
Terry
Posts: 395
Threads: 33
Joined: Jul 2013
City: Horsham, PA
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Tnx If I'm lucky all it will need is a p/s recap and the AD trans. Should be an easy one. Famous last words!!! Got to order some one mic mylars. Need a few for the Philco 87 and 95 too.
Terry
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
12' Philco
|
| If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel.
Kareem would have an e...morzh — 01:48 PM |
|
12' Philco
|
| And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM |
|
Hickok AC51 tube tester
|
| I think they have only shown the secondaries of the transformer.
Two of them feed the rectifiers' filaments.morzh — 12:58 PM |
|
IF can wire size and Rubber mounts?
|
| Arran
If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM |
|
12' Philco
|
| Rod,
Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently.
H...morzh — 12:54 PM |
|
Hickok AC51 tube tester
|
| Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM |
|
IF can wire size and Rubber mounts?
|
| Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM |
|
Hickok AC51 tube tester
|
| Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM |
|
IF can wire size and Rubber mounts?
|
| A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM |
|
My last cabinet for this year
|
| Hello Dan,
That is really beautiful what great looking radio you have !
I have friends who live in Calgary and the wea...radiorich — 01:51 AM |
|
Who's Online
|
There are currently 5482 online users. [Complete List]
» 3 Member(s) | 5479 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
