Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Fada 46
#1

Any one out there have one? I'm about to pick one up after an about 500 mile round trip if it looks as good as the pictures. Otherwise I will spend a couple of days with my wife spending the money in Las Vegas. I know it needs one knob that will take a long time to possibly find. Other than that and grill cloth, who knows what else inside. Should be fun to try to bring back and may take me to the end of my career restoring. Note, I'm not collecting for those that read the Phorum. So any one else have one of these radios?
Jerry

Link:

http://www.radiomuseum.org/r/fada_46.html

A friend in need is a pest!  Bill Slee ca 1970.
#2

Well, I think it is a fantastic looking set. Icon_thumbupIcon_thumbup

No idea how difficult the electronics are. A TRF is a simple set, but the construction techniques of the period can make for a challenging resto.

Good luck, and keep us posted!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 3995 online users. [Complete List]
» 1 Member(s) | 3994 Guest(s)
Avatar

>