The Green Weenie 1936 116X
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Here is a parts set I picked up today. Fugly green painted, but basically all there. Cabinet is hurting big time--delamination on sides, top is loose. All three clarifiers have a hole in them, but repairable. Main speaker I believe is intact. Also got a Motorola 10Y I put in the other phorum, and a nice Seth Thomas adamantine clock case that I have all the parts to make whole again.
[Image: http://i1185.photobucket.com/albums/z345...3dacfc.jpg]
[Image: http://i1185.photobucket.com/albums/z345...e6b374.jpg]
Gene
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Custom paint job by Arthur Deco...
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
Ew who could even like the paint color
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
I swear, we Americans must have really hated anything looking natural after the war. What is that? The green that was all over in the 60's or the 70's? Blecch! At least it looks complete.
No matter where you go, there you are.
Posts: 1,455
Threads: 96
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Wow Gene...good luck with her. Are you going to retore her or use it as a parts set? Looks like everything is their to keep it a whole radio.
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Good one Chuck!
Kind of reminds you of the green they used on cars in the 1950's....
The veneer on the top is shot/missing quite a bit of it. So the whole top would have to be done. I can get the cabinet firmed back up by redoing the glue blocks and the delamination on the lower sides. I haven't ever put veneer on anything so I don't know how that would go. They are nice looking radios if they are done. It is all there from what I can see.
Gene
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
The top surface looks to be flat, so putting on new veneer would be pretty easy. You put glue on both surfaces, let it dry, then iron on the new veneer. Trim, sand, and you are done. Search you tube, there are several good videos showing how it's done. That would be a nice radio to save.
The artist formerly known as Puhpow! 8)
Posts: 56
Threads: 6
Joined: Mar 2013
City: Grand Junction, CO
I would try to save the cabinet. Veneering is easy. I know this because I can do it.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Hello, Gene: that's quite a project!! The 116X is one of my favorites, nice combination of power, sound quality, and reception.
The paint may be a royal pain in the thing one sits on. My 116B cabinet was painted with white house paint on the sides and top and gold spray paint on the front. It took forever to get it all off.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Must have been in the Warden's Office. Agree, save it!
Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
I agree with CodeFox its only missing the Bars, Also I wouldn't call it a parts set, but a repairable Radio untill proven otherwise..
THANK YOU Marty
Posts: 298
Threads: 22
Joined: May 2012
City: Chattanooga
State, Province, Country: TN
Looks like someone had some left over after painting the interior of a school bus.
It's not how bad you mess up, it's how well you can recover.
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Hi Gene
In the spring I bought a 116X from a member here,it came with a lot of extras. A complete 2nd chassis, speaker, large clarifier, dial escutcheon, rubber mounts,etc.The only thing that was missing where the two small clairifiers. About a month later someone in the area was parting out a nice 116X on Epay. Needless to say I jumped on the cabinet which was in good shape. It sold for a meager amount like $10 or so. The speakers sold for something crazy like $200. That's how I ended up with two of these old guys
I like the style of the cabinet better than the '37 model but I'm pretty sure it won't sound as good even with a couple of tweeters to replace the two missing clairifiers.
GL with your project looks like a lot of fun and enjoyment in the end!
Terry
(This post was last modified: 09-28-2013, 05:31 PM by Radioroslyn.)
Posts: 56
Threads: 6
Joined: Mar 2013
City: Grand Junction, CO
I wouldn't worry to much about the missing acoustic clarifiers. I've read the patent and I'm 99 % sure they do nothing.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
Who's Online
|
There are currently 3991 online users. [Complete List] » 1 Member(s) | 3990 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|