My Next Project - Butterfly Radio
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
I thought I would share my next restoration project. It's a sad little Philco Model 45 that needs quite a bit of help. Normally I would do the chassis first, but winter is approaching and I'm gonna knock out as many cabinets as I can this fall. Here it is..
As you can see, it has some old glue caked into the slots. Anyone got any ideas on how to get it off the wood?
One more thing... I don't create these threads to show you I am the forum expert on refinishing. Actually, it is the opposite.. I'm no expert at all. My goal is simply to encourage everyone to try their hand at repairing and refinishing cabinets. Hey, if a guy named Puhpow can get decent results, so can you!
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-02-2013, 08:37 AM by Jamie.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Now, I'd like to see how you replicate the louvers in the top plus the two raised bars in the top. (It looks like someone removed the original cabinet top and installed a plain piece of wood in its place.) Good luck!
--
Ron Ramirez
Ferdinand IN
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
ohh sounds like a challenge to me 
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
heheh.. it sure does!.. I've been asking myself those same questions. I'm trying to find good photos of a 45, so I can decide the next move.
The artist formerly known as Puhpow! 8)
Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
PuhPow, I want to Thank You for the picture, I at least now know what knobs my Radio would take..
THANK YOU Marty
Posts: 4,703
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I agree with Ron, I think that is exactly what happened, the original top came off, or suffered some other damage, so someone put a piece of thin plywood in it's place. The original may have been laminated too but thicker, and it had a tongue to fit into the groove on each side, the grooves that have since broken away. That cabinet needs a little more help then some wood filler and lacquer can offer on short notice. I would work on something else first that doesn't need so much reconstructive surgery.
Regards
Arran
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Nahhh.. I'm not shy. The new top will be created this week. Stay tuned...
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-05-2013, 10:26 AM by Jamie.)
Posts: 4,381
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Good luck kid! My 45L has a very nice tone to it. I hope your version looks good and sounds super when done. Keep us posted.
Regards,
paul
Tubetalk1
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Thanks Paul! .. I found some great photos of an original 45 on Ebay. A very good friend of mine has a woodworking setup in his basement... routers, lathes, you name it. He offered to help me make the new top. (Translated - he's gonna make it, and I'm gonna watch..8)) I've got my cabinet stripped and I'm taking it over there tomorrow. He's going to look at it and tell me what kind of wood to buy.
Tomorrow afternoon, I'll go buy the wood and any veneer required and then make the top on Thursday. So if all goes well, I should have some photos soon.
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-05-2013, 07:58 PM by Jamie.)
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Yes! We have a top!  Today was a productive day. Of course the top still needs to be glued together, sanded and sealed... but it's coming along...
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-06-2013, 04:33 PM by Jamie.)
Posts: 479
Threads: 73
Joined: Mar 2012
City: Riverside, CA
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
hmm think puhpow is smuggling gold in his radios. top may be wood decal 
Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
PuhPow, Looks Great.. Did You maybe work for Philco in Your Younger years , Or just dream of Working for them ??
THANK YOU Marty
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Thanks guys! .. Murph, if it ever became work, I wouldn't want to do it.
This radio is still a long way from being finished. The top looks pretty good, but there are still some issues left to contend with..
The artist formerly known as Puhpow! 8)
Posts: 61
Threads: 2
Joined: Aug 2013
City: Renton, Wa
PuhPow--is that the original top--or did you make ? looks good
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
HiFi (Chifi) tube amp build - but my own design.
|
| Tim,
nice write up and thanks for sharing !!
Sincerely Richardradiorich — 02:47 AM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM |
|
Shadow Meter Bulb
|
| Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM |
|
Philco 41-608 changer coupler
|
| 3D-printing...short of machining, of course.
Or molding.morzh — 05:20 PM |
|
Philco 41-608 changer coupler
|
| Thanks, Morzh.
That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM |
|
12' Philco
|
| If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel.
Kareem would have an e...morzh — 01:48 PM |
|
12' Philco
|
| And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM |
|
Hickok AC51 tube tester
|
| I think they have only shown the secondaries of the transformer.
Two of them feed the rectifiers' filaments.morzh — 12:58 PM |
|
IF can wire size and Rubber mounts?
|
| Arran
If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM |
|
12' Philco
|
| Rod,
Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently.
H...morzh — 12:54 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
