Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Well... stole is not exactly the right thing to say.
Found at a bargain is more like it.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vie...0221927599
It arrived yesterday, fortunately in good shape. My only complaint is that I asked the seller to ship it face down; and it was shipped face UP.  Which is a great way for speakers to get ripped out of cabinets, and chassis to come loose, also; especially heavy chassis such as this. Only the packing material in the back of the radio saved it, I think. But the main thing is, it survived shipment so I'm a happy camper. 
Photos to follow...
--
Ron Ramirez
Ferdinand IN
Posts: 893
Threads: 9
Joined: Mar 2008
City: Vieques, PR USA
State, Province, Country: PR
Good deal indeed. I suspect that big brown spot on the left side scared away some buyers. What did that turn out to be?
Posts: 111
Threads: 27
Joined: Oct 2007
City: Livonia, MI
Nice find - I don't have a cathedral or tombstone yet but eventually would like to get one. What I hope is going to happen is that I stumble on one during one of our summer trips 'up north' at a yard sale and get it for a reasonable price. Might be wishful thinking but one can always dream 
Posts: 181
Threads: 0
Joined: Mar 2008
City: Pocasset, MA
It can happen. My 116B was free from a co-worker, so I couldn't complain, despite the very bad refinish job from 30 years ago.
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Ron, I saw that not long after you hit it. I was bummed  Didn't realize it was you due to my sorrow...........LOL....Good job!
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 909
Threads: 117
Joined: Jun 2007
Very nice radio Ron!! Congrats!! Yes, shipping vintage radios scares th *livin daylights* out of all us restorers!! And you can bet, all the shipping trucks personnel throw all their packages around carelessly, and dont care!! Looks like you dodged a bullet on that one!! I have shipped and received many rare vintage electronics via FedEx,UPS,etc, and it always makes me nervous! I have *insured* (to full value $$) on ground-services of ALL the major carriers before, then found out all of the items considered *vintage*,*antiques*,.. would only be covered up to $100. max by the ground carriers insurance companies from the get-go! Many of FedEx & UPS desk employees never mention this, and charge (.25 extra) for every $100. above the 1st free $100. coverage on ground shipping!! RIP OFF MAX!!!
Hence, I thought that both I,.. & my customers were covered above $100 max value when shipping, (and being charged extra), ... many vintage electronic items, and the counter-personnel never told me any different!! They keep the "extra-insurance money" they charge all us, but "push comes to shove" on ground shipping, all any of us have is $100. MAX on any & all vintage, antique electronics we ship with these type services!! Didnt mean to change the subject here, but shipping vintage electronics is very *risky* at best!!! Glad your item arrived in good condition indeed!! Enjoy!!! TxRockr.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Some quick photos.
[Image: http://www.philcoradio.com/images/phorum...f/1161.jpg]
[Image: http://www.philcoradio.com/images/phorum...f/1162.jpg]
[Image: http://www.philcoradio.com/images/phorum...f/1163.jpg]
Bill - that spot on the left side was only some tinted lacquer that had not rubbed off. It's odd that on these 1936 Philco tombstones, most of the dark tinted lacquer did not seem to last. Maybe an inferior lacquer used at the time?
Alan - welcome to the Phorum, glad to have you aboard. They are better when they are free, yes? Even if you have to clean up and redo a bad refinish, as long as it isn't polyurethane...
--
Ron Ramirez
Ferdinand IN
Posts: 181
Threads: 0
Joined: Mar 2008
City: Pocasset, MA
Does the face still have its original finish? I see the decal is there.
Mine had been redone in "mahogany" varnish, the same color all over. Some of the inlay was replaced with bondo, painted black. As a final touch, the previous restorer stapled the grille to the inside of the cabinet, but used staples that were too long. They poked out through the front, and pushed a few chips of veneer too. I'll bet that guy was really pissed, as he apparently gave up and never used it.
It looks a lot better now but I keep getting the face too dark (looks good in the sunlight where I'm spraying). I think I may try it a third time.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Alan - Holy Cow! Sounds like quite a hack job was done on your 116.
Yes, the finish on the front panel of mine is original, with original PHILCO decal.
I think I will do a "selective" refinish on this one; rub down the front panel to cut some of the roughness without losing the original finish completely, and spray with clear Deft to "renew" the look. The top, sides and trim will get new extra dark walnut toner followed by clear Deft.
--
Ron Ramirez
Ferdinand IN
Posts: 181
Threads: 0
Joined: Mar 2008
City: Pocasset, MA
That's good to know. I found some photos of 116s and similar sets "unrestored" but they were in worse condition, or taken from ten feet away with a phone camera. Some had more prominent grain markings, while yours looks just like mine, not much figure to the wood.
Now, is it a trick of the lighting, or are the middle and bottom sections just a tad darker than the sides?
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I just looked at it again. Had to look REALLY close...but you are right, there is a slight difference in the shading; the middle and bottom sections ARE just a tiny bit darker than the rest of the front panel. I had never noticed that before.
--
Ron Ramirez
Ferdinand IN
Posts: 225
Threads: 14
Joined: Oct 2005
City: Grand Blanc, Michigan
Well one of these days maybe I will run into a nice 116 at a decent price, I have been lucky enought to pick up a 16B (5 band) and a 38-2670 so a nice 116 tombstone would fill the gap nicely. Hopefully you will post some post restoration photos just to keep us up on things.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I will, Stude, I promise.
--
Ron Ramirez
Ferdinand IN
Posts: 337
Threads: 15
Joined: Nov 2005
City: Ortonville, MI
This set is in your book. I found a totally stripped 116B cabinet at the Findlay, Ohio ham swap one year. No chassis; no nuttin'. It was about 10 bucks, so I bought it. That year, at AWA, John Wolkonowicz knew a guy there who was junking one, on the spot. He took the power trans., and a few other things, so I ended up with the chassis sans a few things that I had on hand at home. A speaker and speaker board were with the cabinet, which was just driftwood. By the time I arrived home, I had enough pieces to completely build a working set. I did assemble all the stuff, finish the cabinet, re-cap, of course, and there it is: a complete 116B. Very soon after, the other 116B came along; possibly again, at AWA. Re-cap and total refinish, and it's also in your book.
Now Ron, you think YOU got a real shlemiel deal? Try this one. I was at the flea market in Pontiac, Mich., one Saturday.I looked beneath a vendor's table, and saw a Philco 16?, 116? from the rear. Looked at it from the front, and it was a 1935 vintage 16B. How much, sez I? Ten bucks, sez he, and 10 clams came ripping out of my wallet like a rocket.
I restored it; both chassis and cabinet. It was a aurplus set to me, so a friend talked me out of it. He was ecstatic over it, of course. One of those rare occasions where I sell anything.
Posts: 114
Threads: 31
Joined: Oct 2005
Want to trade that console you've been wanting out of my garage? EMAIL me when you get a chance, OK?
73 de,
Gary/N9VU
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
trying to identify this wire type
|
| Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM |
|
trying to identify this wire type
|
| It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM |
|
Gilfillan Brothers Car Radio?
|
| Hi everyone,
Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM |
|
trying to identify this wire type
|
| Here's one source for your wire of many.
Take care and BE HEALTHY! Gary
P.S. Can't get the right color you need? I ...GarySP — 06:40 PM |
|
trying to identify this wire type
|
| ...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM |
|
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
| I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM |
|
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
| Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM |
|
trying to identify this wire type
|
| The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
|
trying to identify this wire type
|
| Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
|
Philco 60 Squealing
|
| All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
|
Who's Online
|
There are currently 5805 online users. [Complete List]
» 2 Member(s) | 5803 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
