What should I do with this?
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
This cabinet has paint on it and some areas are in rough shape. Should I completly strip it down or can I remove the paint without harming the finish? This will be my first cabinet and looking for opinions on what you guys recommend.
NOTE: Edited by site admin to make the photos show up.
[Image: http://s1336.photobucket.com/albums/o654...faebbf.jpg]
[Image: http://s1336.photobucket.com/albums/o654...01a722.jpg]
[Image: http://i1336.photobucket.com/albums/o654...d018b1.jpg]
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
I would strip and refinish that one. It looks pretty far gone to me. Sorry to tell you that.
The artist formerly known as Puhpow! 8)
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Thanks PuhPow. Side question was you able to see more than the one picture? I tried to put 4 pics up and see there is more in the blue img. box.
Going to start stripping the cabinet today.
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Mike,
You'll need to put the IMG code in for each of your images for them to show up.
That will be one nice looking cabinet once its refinished. You should remove those dreaded metal sliders on the bottom of the legs before the damage a floor or two.
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I was able to dig one other image url out of his post. The cabinet shows a lot of promise but definitely needs to be stripped and refinished. Also, the grille cloth looks to be in very good condition.
[Image: http://i1336.photobucket.com/albums/o654...01a722.jpg]
(This post was last modified: 10-16-2013, 01:56 PM by Bob Andersen.)
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Thank you for the responses, I don't know why I always have trouble with pics. I had individually clicked each img. then hit ctrl-v and they showed up as four seperate imgs in the post so I hit post and seen that only one was viewable. I'll try to get it right next time.
The cabinet is very solid with only a couple small areas that will need veneer work. About that grill cloth. Seems to be a W- pattern. The dark on it is paint any ideas on if it can be removed?
If not I think I'll just live with it because it is in good condition. Oh yeah, the metal sliders will be going away.
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Some folks have had success spraying grill cloth with a light coat of spray paint. If it works, it works great. If it doesn't work, you need new cloth. I've tried it with a 50-50 success rate. I only try it as a last resort on a cloth that I am throwing out anyway.
The artist formerly known as Puhpow! 8)
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Mike, from what I can see on the grill cloth it just look fine, actually exceptional for the age of the radio. I would carefully remove for the refinish and do nothing other than a gentle vacuuming of it with a soft brush attachment. The stuff is fragile after so many years. Are you certain it is paint and not dirt?
Jerry
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 10-16-2013, 05:35 PM by jerryhawthorne.)
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Thanks PuhPow And Jerry Hawthorne. I do plan to remove the cloth before stripping the front. I will have to consider my options then. Think it is black spray paint could be wrong I base it on the hit and miss black paint on the cabinet. I don't think you can buy the W pattern. The chevron V is available but I want to keep the orginal if at all possible. I hope I can get more help from you guys as I delve into this. Even though its my first attempt at a cabinet refinish I want it to be as nice as possible.
PS. Thanks site administrator for getting the pics up.
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Mohawk makes a spray on cloth cleaner/spot remover. I meant to buy some the last time I was at the refinishing store. I've got a dirty grill cloth on that GE I'm working on. I plan to go back to the store tomorrow, and I'll let you know how it works out.
The artist formerly known as Puhpow! 8)
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
I sure appreciate that. I plan to order the mohawk toners , blender flowout & no blush tomorrow if it works I'll put it on the list.
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Here is a couple pics of the cabinet after two rounds of citristrip. The top has dark spots in it that I treated 4 times with stripper I finally sanded very lightly with 400 grit sand paper but afraid to go any further for fear of sanding through the veneer. Any suggestions on how to remove or should I let them be?
[Image: http://i1336.photobucket.com/albums/o654...7934ea.jpg] [Image: http://i1336.photobucket.com/albums/o654...de7650.jpg]
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
You MIGHT try this: If you can find it, buy some powdered whiting compound at your hdwe. store or paint store. Mix it with water into a consistency similar to paste. Apply to one of those dark spots. Let it dry for 24 hours. Then gently scrape it off. If it has improved, put on a 2nd application. This won't hurt the veneer.
Martin Blankinship suggested that to me several years ago on a Z chairside I redid and it was amazing how it helped. I used 4 applications before my "spots" stopped improving. After toning and refinishing. you must look very carefully to even get a hint of where the dark spots were.
Results may vary!
Caveat: try this on one of the small spots to start with. Let us know if it helps.
Posts: 76
Threads: 20
Joined: Oct 2010
City: Oskaloosa
State, Province, Country: KANSAS
Mike
This is what I have used. I bought some at a local ACE hardware. It worked good to remove a dark spot in a solid mohagany cabinet a few years back. I still have a lot if you want to borrow some.
http://www.sherwin-williams.com/homeowne...od-bleach/
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Thanks Art Hoch and Skip for the suggestions. And thanks for the offer to borrow some of the product. There is a Sherwin williams close to me Skip,I'll just run down and pick some up.
I also have did another 2 rounds of stripper and will post pics tomorrow. I have some questions about when you know you stripped the cabinet far enough.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Philco 38-7 Speaker
|
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM |
Who's Online
|
There are currently 2508 online users. [Complete List] » 2 Member(s) | 2506 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|