1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Other Radios (Non-Philco)

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
Eico 667
MarkD
Junior Member
**
Posts: 12
Threads: 3
Joined: Sep 2013
City: Glen Ellyn Illinois
#1

10-22-2013, 11:46 AM
Not sure Im posting this in the right thread so if not ,sorry . I need help with the settings on my eico 667 for some 6b4g tubes. The charts I have seen dont include this and Im rather new to tube radios and I dont know how to determine the settings and I really dont want to make a mistake and ruin these expensive tubes so if anybody has these settings it would really be appreciated.
THANKS
mark
Find
TA Forbes
Deviate Emeritus
*****
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
#2

10-23-2013, 12:44 PM
The Eico 666 is very similar to the 667.

The 666 model lists following for 6B4G

6.3, 7, 75, 12315, 11111, 4, 1, 3 5, 3
Find
MarkD
Junior Member
**
Posts: 12
Threads: 3
Joined: Sep 2013
City: Glen Ellyn Illinois
#3

10-23-2013, 12:57 PM
Thank you very much im going to test my tubes tonight Icon_smile
Find
« Next Oldest | Next Newest »
Thread Closed




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Philco 89 indicator light.
Hello Jim, I have done several 89s. The trick is to move the drum in or out on it's shaft. You will need to loosen a set...dconant — 07:36 PM
An attempt to remove the Field Coil from a G speaker
MrFixr Yes, it is my plan to go with 45rpm spider if I go that far. No, the pole was not left-handed as I unscrewed ...morzh — 07:14 PM
Philco 40-120C Restoration
Change the tube. Check the tube's bias network. Are any other tubes experience the drop or just this?` Is resistor 23 OK...morzh — 07:09 PM
Philco 89 indicator light.
I forgot how the pointer is formed: could you show the way it is formed and how you tried to change it?morzh — 07:01 PM
An attempt to remove the Field Coil from a G speaker
Was that pole piece left handed ? Since the metal "spider" is toast, wonder if you can either get the "4...MrFixr55 — 06:54 PM
Philco 91 Restore Code ??
Thank you Rod.  Hello MrFixr55. Thank you for the long reply. My radio is the 121 version (1 speaker) and I am aware ...dconant — 06:36 PM
Philco 91 Restore Code ??
Your 8 watt transformer is good, the 42s produce 6 watts and you won't be sending maximum volume to the speaker anyway. ...RodB — 05:54 PM
RCA T62 is playing.....
So sometime  back I posted some photos of a badly damaged in transport T62, not the tank. I did manage to get a donor c...Paul Philco322 — 05:43 PM
Philco 40-120C Restoration
I found the problem. I had some faulty wiring on the field coil. Unfortunately, now I'm getting low voltage on the plate...bluecap — 05:21 PM
Philco 89 indicator light.
Is there some trick to getting the indicator lamp evenly spaced between the frequency bands? Seems like no matter what I...Jim Dutridge — 04:37 PM

[-]
Who's Online
There are currently 2339 online users. [Complete List]
» 3 Member(s) | 2336 Guest(s)
AvatarAvatarAvatar

>
  1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Other Radios (Non-Philco)