Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
I got this old Philco a while back. Not sure what model it is, but a 54, 57 or 59 I think.
When I got it, it was painted the UGLIEST shade of brown. It's SO ugly I can't even describe it without using some of Carlin's "Seven Words"..
Last night, after having finished the chassis restoration, I commenced to strip that awful paint off, figuring that anything I could do to it would have to be an improvement. Imagine my surprise and befuddlement when I found what was underneath:
Now, WHY would anyone cover this beautiful grain with that horrid paint? The white spot on the upper left is wood putty where I'm patching a bit of a gouge before I refinish it.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
It's a model 57C. Yes, looks much better without the brown paint.
Who knows what motivates people to paint things which were never painted originally. Myself, I will never understand the logic (or, more appropriately, the lack thereof) of painting things white, making them look "distressed" and adding some decals, then selling it as "shabby chic." I have a different name for it...substituting one of Carlin's seven words for "chic"... 
--
Ron Ramirez
Ferdinand IN
Posts: 1,519
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
+ One Brenda, I'am glad to see you got a hold of that radio. Looks like it will clean up nicely.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Great job and really lovely looking wood Brenda. At least it wasn't painted white! Who knows why it would be painted? Let's see how it goes together and looks when your done.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Ron,
Do I need to find a PHILCO decal for this? It seems to be missing something...
Posts: 5,584
Threads: 291
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Brenda
What Bob said, plus you'll want a DCL-PH8 from Radio Daze to replace the missing PHILCO decal.
--
Ron Ramirez
Ferdinand IN
Posts: 5,650
Threads: 56
Joined: Sep 2008
City: Sandwick, BC, CA
There is one benefit to someone painting a wood cabinet with a thick layer of paint, it does an excellent job of protecting the wood from dents and gouges. It also turns off a lot of potential buyers making such radios cheaper to buy.
Regards
Arran
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Good point, Arran. 
Thanks Ron and Bob. I ordered the decals and some knob washers.
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Does anyone do repros of the brass foil dial?
Posts: 5,650
Threads: 56
Joined: Sep 2008
City: Sandwick, BC, CA
I wish I knew of someone reproducing the foil dials, I know of a Rogers "Pee wee" set like that Philco that has the same problem. Radio Daze was hinting that they might make some foil dials so you may check with them. They are sort of strange, it's like a heavy aluminum foil that was pressed to give a faux medallion relief effect, in the case of the Rogers I saw the background was painted black. It's too bad that they didn't make them like the brass and aluminum serial number plates, then you could clean them up and repaint them.
Regards
Arran
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
54C Complete Teardown/Rebuild
|
| The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM |
|
54C Cabinet Refinish
|
|
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM |
|
54C Complete Teardown/Rebuild
|
| While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project. O...glyphmon — 11:07 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Hello roy,
that great news glad it worked out for you !!
Sincerely Richardradiorich — 10:50 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Safety caps arrived today. Soldered one in and had a successful first power-up. No magic smoke escaped and it tunes in...glyphmon — 09:53 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Tim, you refer to “AK”. Is that Alaska or Atwater-Kent, or… JoeJoe Rossi — 11:49 AM |
|
Grundig 5088
|
| Skip,
you are back to this one?
As for fixing, Mark Oppat fixes vol. controls. Don't know about Grunding, but woul...morzh — 10:30 AM |
|
Who's Online
|
There are currently 2181 online users. [Complete List]
» 1 Member(s) | 2180 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
