Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Found My Philco Holy Grail!! A 201X
#1

Today is a GREAT day! I found a Philco that I actually never thought would be possible to do. A 1935 201X! My avatar is a 200x which is what I saw on CL couple of years ago and didn't go after. I do like the cabinet on the 200x a lot, but the 201x has BOTH broadcast and shortwave, which is a big bonus in my eyes. Here is the baby just as I found it. The sound absorbing screen on the back got damaged in the move, but I have the pieces and I believe I can make it whole again.

Overall, the cabinet is is nice condition with some scratches, marks, etc. but I will first see how good I can make it look and then reassess. One can cap is gone, but I don't see that as a major issue. The dial scale is all there and intact as far as I can see. No hole in the speaker. I am really glad the grille cloth is available.

[Image: http://i1185.photobucket.com/albums/z345...50a56b.jpg]
[Image: http://i1185.photobucket.com/albums/z345...b506da.jpg]
[Image: http://i1185.photobucket.com/albums/z345...211abb.jpg]
http://i1185.photobucket.com/albums/z345...dd8ca0.jpg[/IMG][/URL]
[Image: http://i1185.photobucket.com/albums/z345...5f0277.jpg]
[Image: http://i1185.photobucket.com/albums/z345...2bb7b9.jpg]
[Image: http://i1185.photobucket.com/albums/z345...dd8ca0.jpg]
[Image: http://i1185.photobucket.com/albums/z345...32f125.jpg]
[Image: http://i1185.photobucket.com/albums/z345...eee1a0.jpg]

Gene
#2

Congrats. on your find Gene. Looks like a great project with lots of potential.
#3

A GREAT find. Considered the 1st Hi-Fidelity radio by Philco.

It will be the centerpiece of your collection once restored.
#4

A very good find! Icon_biggrin

No matter where you go, there you are.
#5

WOW, Gene, that's a great find!!!!

Definitely on my bucket list!!!!
#6

Wow Gene good for you! It is always nice to find a radio that you can only hope to have in ones collection, and when one comes up we just can not believe it. I like the detailed woodwork on the cabinet. Good luck on your find and keep us up to date as to its comming along!
#7

I had a 201X on loan from a collector friend for a year. I wanted to compare it side by side with a later Stromberg-Carlson with the "acoustic labyrinth" for audio quality (the 201X won hands down) but while I had it, I wanted to try improving its appearance. It had some deep scratches, even gouges, in the finish. But the basic finish was glass-smooth; you could shave in front of it. With a little dye in the scratches, they disappeared. From a few feet away all you could see were reflections of objects in the room, so the scratches and gouges weren't noticeable. I recommend putting some effort into cleaning and polishing, and I think you'll be happy with the result.
#8

Thanks for the positive comments everyone!

Alan, I have been cleaning the case up, and I think the sides and upper portion will be ok even with some scratches. The front toned parts, especially on the bottom area have quite a bit of loss, so I may have to redo those areas.

I will say this is the ruggedest cabinet I have seen. Even with no chassis or speaker in it, this thing still weighs! It is built like a tank.

Gene
#9

Beautiful radio Icon_thumbup
That's one I'd like to have but it's a very hard to find radio.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM

[-]
Who's Online
There are currently 2923 online users. [Complete List]
» 2 Member(s) | 2921 Guest(s)
AvatarAvatar

>