Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My New Westinghouse
#16

Westinghouse and GE made many RCA sets through the 30's.

Paul

Tubetalk1
#17

It's a Canadian RCA Victor, made in Montreal, probably a model A-33 from around 1939-40. Canadian Westinghouse made sets with chassis of their own design, those are completely different from Canadian RCA sets in those years, the near market equivalent in the Canadian Westinghouse lineup would be an 1182X, which had five bands and motorized tuning.
Regards
Arran
#18

A very interesting set! Icon_thumbupIcon_thumbup

Agree with Brenda in that there IS a lot to DX on shortwave.

Basically, broadcast on the higher frequencies (lower wavelengths) are prevalent during the day and broadcast on the lower frequencies (higher wavelengths) are prevalent at night. Here in NC I regularly get Voice of Russia, RCI (Radio China), Radio Romania, Radio Havana. Less frequently I receive BBC, Radio Albania, Radio Teipei, and Radio Tokyo. SOMETIMES between 0100-0400 in the morning I get stations from Australia and New Zealand that broadcast vic 9MHz to 13MHz.

HOWEVER, you will find exceptions to this rule. The thing to do is tune in at different times of day on the different bands and log what you receive for future reference.

With a GOOD antenna you will also find more selections on the regular AM Broadcast band, especially at night.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco Model 80 Transformer resistance
Just forget this number, it is useless anyway. Simply proceed with your project.morzh — 10:08 PM
Philco Model 80 Transformer resistance
My $0.02 is that it is a misprint. I tried to look up the value for the similar 84 and 37-84, and ther is no resistance...MrFixr55 — 09:51 PM
Philco Model 80 Transformer resistance
Thanks for the quick reply! Hmm...well that's good, so what am I seeing that's 1042 ohms on the schematic for the pow...Mike L — 08:46 PM
Philco Model 80 Transformer resistance
The DC resistance of the primary is 8 to 9 Ohm.morzh — 07:54 PM
Philco Model 80 Transformer resistance
I have a feeling the primary winding on the power transformer is bad. My resistance reading on the primary side is 9 ohm...Mike L — 07:48 PM
Rusty Tuning Condenser
I would try Naval Jelly and use a soaked pipe cleaner to get it where it needs to go.RossH — 06:56 PM
38-10T chassis Restoration begins
Hello Dconant , they sold mica to use as a insulator between transistors and their heatsinks too. Rob I will remove th...radiorich — 02:52 PM
38-10T chassis Restoration begins
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM
38-10T chassis Restoration begins
Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM
38-10T chassis Restoration begins
It is acceptable but not desirable. Plastic is not an approved cap dielectric, and even though a reasonably thick piece...morzh — 11:52 AM

[-]
Who's Online
There are currently no members online.

>