Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Deluxe Model 95
#1

Icon_angel

I have a Philco radio Deluxe Model 95; year 1929; cabinet in good to great
condition; needs new tubes. I want to sell it. How much might I ask?
#2

Joanna,

Greetings!
A lot depends on asking price and it is as subjective as Politics.

You say it needs tubes. Are they missing or are you saying that because the radio is old?
Are any major components missing? speaker present and in good shape?
Do you want to sell it right away? Then price it that way.
Geography has a lot to do with asking price too (as strange as it sounds). I am in NY as well and a radio I buy here for $100 might fetch $200 on the West coast..

Whatever you do (if you haven't yet) DO NOT plug it in until someone qualified looks at it. Plugging it in may surprise you and ruin critical components (Transformer).

In my buying experience, and without seeing it, I have paid anywhere from $40 to $100 to a set like yours. I am a collector so I think I am cheaper than some. If it's in exceptional shape and I desired that model I may pay up to $150.

Some others may think/say I am off on my estimation but again, it's subjective.

Hope it helps..

Tim
#3

Insured and proper Shipping will often double the price, and once restored and resold, will be half again just to break even, so that's where it is. Hobby is getting expensive!
#4

With no tubes, not working, good cabinet, no rust, good speaker, good grill cloth, cash, $50 - $100.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

No tubes makes it an under $50 radio, maybe less then $30, the tubes average about $5 a piece except for the output tubes which are more, it has two of those and seven others. Are the tubes missing or are they there but the set is not playing? But it depends on what style of cabinet the 95 has, lowboy cabinets are the most common, highboys less common, highboy with doors the least common. If it needs refinishing, or cabinet repair, that knocks it down even more.
Regards
Arran
#6

Welcome Joanne. We really need some pictures posted here to help you.
Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#7

I would concur with the $50-$100 figure; maybe $150 if in exceptionally good condition with all tubes in place.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently 3939 online users. [Complete List]
» 1 Member(s) | 3938 Guest(s)
Avatar

>