Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Phonographs.
#1

Now that I have one, I wonder what was the last year Philco quit making its own changers and switched over to vendors like V-M? Just curious as I also wonder how hard it would be to find a nice Philco Hi-Fi with one of these changers in it. (M24, M26, M28 ).

No matter where you go, there you are.
#2

"D" Line (1956) was the last year Philco used its own changer across the entire line.

"E" Line (1957) was a cross over year. The Philco M-38 was used in low end portables and the M-39 WebCor Micro-Mix changer was introduced.

("F" line) 1958 introduced the VM in the low end and continued the Micro-Mix for the high end. Eventually the Glaser-Steers was phased in for the high end. The GS was clearly the best changer Philco ever used.

The original Philco changer was mono only and never available in stereo.

Don
#3

Thanks for information! I have a Philco hi-fi with the VM changer, but thought I might keep an eye out for one with the Philco changer as well. Nothing against the VM, I like that brand a lot.

No matter where you go, there you are.
#4

For what it's worth, I believe the FIRST one they made themselves was the one in the '42 combo with the Beam-O-Light and the bakelite arm.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4295 online users. [Complete List]
» 1 Member(s) | 4294 Guest(s)
Avatar

>