01-25-2014, 11:28 AM
Since I haven't ordered parts for this set yet, I thought I'd take the time to check what I'll need in addition to caps and resistors.
Power transformer reads good resistance, so hooray.
Audio output transformer (part #32-8120) has an open primary.
That's 2 for 2 1942 model Philcos I've worked on with bad audio xfmrs.
Anyway, the service bulletin for this model says that it's only 3 watts audio output. I'm thinking a Hammond 125B or 125C will work as a generic replacement. Though I do wonder how much the sound will suffer given that these Hammond's frequency response is only 150Hz-15KHz. Was the original any better?
Power transformer reads good resistance, so hooray.
Audio output transformer (part #32-8120) has an open primary.
That's 2 for 2 1942 model Philcos I've worked on with bad audio xfmrs.
Anyway, the service bulletin for this model says that it's only 3 watts audio output. I'm thinking a Hammond 125B or 125C will work as a generic replacement. Though I do wonder how much the sound will suffer given that these Hammond's frequency response is only 150Hz-15KHz. Was the original any better?
It's not how bad you mess up, it's how well you can recover.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
