Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-675 for $50
#1

It appears that the prices for non-primo conditon radios has dropped quite a bit on ebay. I was the only bidder on a 37-675 that appears to be in good condtion but needs restoration. For $50 even the chassis is worth that much but to get a complete 675 for $50 is nice.
#2

Wow, what a steal! I didn't even see that one.

--
Ron Ramirez
Ferdinand IN
#3

I think I saw that one on eBay too. It was/is a De Luxe model, right? Congrats! 8)

Now why did this model originally cost so much more ($275) than the 37-116x ($195)? The 37-675x only has one central speaker, 12 tubes, and is not 'high fidelity' whereas the 37-116x had 4 speakers, 15 tubes, and IS high fidelity? I don't get it.
#4

http://cgi.ebay.com/370059057990 Not in mint condition but it is complete and shouldn't be that hard to restore.
#5

Claude, I almost bid on that. But the drive to get it, turned me off for right now. I was all set to hit that bid button, then I decided not to with about 30 seconds to go Icon_arrow Nice catch Icon_wink

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#6

I guess as with many of the 37 models you could get this one with the shadow meter or without and this one is without (magnetic tuning). It really appears to be a lot like my 38-1 with PP 6F6's with a 6F6 driver so the output should be 12-15 watts. It has 2 IF stages so it should have decent performance, I have someone that is willing to wrap it up and toss it on a greyhound bus so that covers the shipping issue. For the price with shipping I might have ~100-120 into this radio so that isn't too bad. Actually it is probably a better performer than the 38-1, when I went back I noticed the 38-1 doesn't have a 2nd IF and rather than using a 6J5 as an inverter feeding a 6F6 driver to the PP 6F6 outputs the 38-1 using a 6J5 inverter feeding two 6J5 drivers to the PP 6F6 outputs sucking up one extra tube for the same result.
PhilcoBenz, more than likely the $275 was a typo and it should have been $175. Normally there was about $15-25 difference between the standard and Deluxe model in 37 so I think the price was more like $175. The one nice thing is that the Deluxe model was the less produced model of the two types with the standard being over triple the total of the Deluxe.
#7

You got a good deal on that set and you won't be disappointed in its performance. I restored a standard set a few years ago and was very impressed with it. I ended up selling it but it was tough to do. I have a 16X that I am going to keep and the two were a little too close electrically to justify keeping them both.

Sean
WØKPX




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2781 online users. [Complete List]
» 2 Member(s) | 2779 Guest(s)
AvatarAvatar

>