Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A few Craigslist finds
#1

Hi everyone. While now in the fourth week of waiting for some period appropriate cloth wire for my 89, I've gotten impatient and cleaned out my local Craigslist of cheap project radios. Icon_biggrin


Here's the real beauty, a 38-7 code 121 in nearly perfect condition. All the cabinet needs is a little black touch-up around the grille, even the cloth is perfect. I don't know anything about it, other than the owner said it worked a few years ago. The expensive components are probably all good. This cone-centric dial is intriguing.

[Image: https://lh5.googleusercontent.com/-FSgZP...C_7965.JPG]


The dial has flame thrower stations from all over the country, like WLW, WSM, KDKA etc. WIS 560 is local and still broadcasting, so it's always been in SC.
[Image: https://lh3.googleusercontent.com/-SiXBW...C_7966.JPG]

[Image: https://lh5.googleusercontent.com/-4eDl8...C_7967.JPG]

[Image: https://lh6.googleusercontent.com/-IoNGm...C_7968.JPG]


Here are the rest. Real junkers, but good practice and hopefully worth a few dollars on ebay once restored. Bendix 753M, Emerson 541, Emerson 659B. Yes, the Bendix has a dial face hand drawn onto a piece of plexiglass. The original glass was fairly fragile apparently.

[Image: https://lh5.googleusercontent.com/-kmMr_...C_7969.JPG]


I've also built a low power 'Police' band transmitter in the basement to service the old Philcos. 1.8Mhz is very quiet. I'm really starting to get into this hobby Icon_smile

The older folks I've bought these from get quite a kick out of an 18 year old interested in 70 year old electronics Icon_biggrin
#2

I cleaned out my craigslist a few weeks ago,lol

Some new stuff but they want way too much money. Now its just a waiting game!

Nice pieces though. projects are fun fun fun... Icon_thumbup

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Unfortunately my parents will only tolerate so many receivers sitting on the dining room furniture, and my room is beyond full of my projects, and the garage with dad's. There are a couple more radios there I really want to get, but just have no space for.

I envy you guys with entire rooms or even basements devoted to the cause. My 'workbench' is a small patch of carpet in the corner of my room. Life goes on Icon_biggrin


Will
#4

Love the 38-7. I had a chairside and it sounded great
#5

18 is pretty young to get the disease but when you get out on your own you can work on your P.H.D. (Pile higher and deeper)
#6

Icon_lolIcon_lolIcon_lol
#7

The Emerson AM/FM will look neat and sound pretty good when cleaned and restored!

Paul

Tubetalk1
#8

Antique radios are a lot healthier than what I was into when I was 18. Icon_e_wink Icon_silent


...I mean before Boot Camp anyway...

It's not how bad you mess up, it's how well you can recover.
#9

I underwent the same cure. Amazing what they can do.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM

[-]
Who's Online
There are currently 5532 online users. [Complete List]
» 1 Member(s) | 5531 Guest(s)
Avatar

>