Posts: 228
Threads: 64
Joined: Dec 2013
City: Northbrook, IL
Hi,
As I am almost finished restoring my 38-2670 and 71B, I was wondering about this console. There is one available, albeit w/o "mystery control". How complicated is it? I do not want to go over my head as it almost happened to me with the 38-2670 (RF section), but I survived ( with your help, guys) and enjoyed after that doing the 71B, it was like a picnic. Thanks in advance for advice.
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
It will be fairly intense. Even for an experienced guy. But...not impossible.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Adapting/programming a mystery control is tricky, but Ron has some excellent documentation about this in another series of threads.
Posts: 228
Threads: 64
Joined: Dec 2013
City: Northbrook, IL
@ Morzh "...intense...but not impossible".
That sounds enticing and time consuming at the same time, as with one radio per month average (it is my output now,retired and bored otherwise), we will need more of a living space. On the serious note though, they are asking
$300.00, untested, no remote, nice cabinet. You think it is a fair number?
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
If the cabinet is nice I would go for it as I have always wanted a Mystery control set. There seems to be plenty of the remotes around so you should have no problem getting one of them.
Have Fun!
Gregb
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
From what I've seen sold, with nice cabinet and NOT rusty/otherwise in a bad shape chassis and speaker, yes, an acceptable price. Not that you couldn't try to haggle.
Posts: 4,705
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
No, $300 is way to much for one without the remote in non working condition. These sets have yards of rubber covered wire in them, that alone is a reason to pay as little as possible for one. The squarish cabinet 1939-42 Philco consoles are not really that well liked, they are also not that rare, so it does not make any sense to pay a brand Z shutterdial sort of price for one.
Regards
Arran
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Hey Aaron, if you come across a Mystery control set in good shape for less than that please let me know. I have been looking for one for years and have yet to find one.
Gregb
Posts: 228
Threads: 64
Joined: Dec 2013
City: Northbrook, IL
@Arran,
My wife salutes you, Arran. She is also not happy with the appearance of it.
Well, now it is two against one.I'll see what I can do.Besides, even if the main unit is operational, there is no way to test the remote control receiver part of the unit which is,I believe, 5 tube business plus number of mechanical relays and ratchet mechanism. Decisions, decisions.
Posts: 4,705
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I have found at least two in my area, and several other 1939-42 Philco consoles with squarish cabinets, Philco had a distributor in the region as did G.E. In the case of the one I was thinking of getting the guy was more interested in playing email tag then actually meeting up, so I lost interest, it was a shame because he also had a Philco 118B, but whatever. I was not that desperate to get one because I already have my fill of consoles, and, in the case of the 39-116/39-3116, the radio receiver itself isn't really anything special, five of the tubes are dedicated to the wireless remote circuitry. If you want one bad enough start hitting the swap meets in the U.S Midwest during the summer, or get Klaus to pick one up for you if he goes down there.
Regards
Arran
(This post was last modified: 02-22-2014, 04:28 AM by Arran.)
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
trying to identify this wire type
|
| The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
|
trying to identify this wire type
|
| Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
|
Philco 60 Squealing
|
| All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
|
Philco 60 Squealing
|
| I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
|
Philco 46-420 Code 121 Reception issues
|
| Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
|
Philco 46-420 Code 121 Reception issues
|
| You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
|
Philco 42-1008 conversion kit
|
| Interesting. I haven't seen that before.klondike98 — 07:02 PM |
|
12' Philco
|
| Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
|
Shadow Meter Bulb
|
| Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
|
Shadow Meter Bulb
|
| Ok. Thanks for the correction.RossH — 03:09 PM |
|
Who's Online
|
There are currently 7024 online users. [Complete List]
» 2 Member(s) | 7022 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
