Philco 650B, newly refinished
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
I am open to any and all comments and I would never consider any constructive comments criticism. While Andrea and I feel fairly comfortable doing the cabinet refinishing now, we are by no means experts. There have been many times when we have refinished a cabinet or parts of it several times, before we achieved the 'look' we wanted.
But, with that said, it is really hard to get a true picture of how the radio actually looked when it was new, even with a very well preserved finish, for two reasons. One is that walnut veneer naturally turns more red with age. Secondly, old lacquer finishes, even the best ones, turn yellow with age. Now, I realize I am nit picking here (obsessing), lol! I guess, overall, you do the best you can to make the radio appear as close as you can to how it looked originally. And, as long as it looks good to the owners eye, that is what is important. After all, who is to say what it really looked like.
But, we have decided, to remove the toning from the front panel, and re-tone it with less red.
Thanks for your input.
Ed
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Update. I stripped the front panel and re-filled the grain. I have re-toned the front panel with Mohawk Ultra Perfect Brown. I think it looks better now.
Front - Reddish cast
[Image: http://i135.photobucket.com/albums/q136/...BTone5.jpg]
Front - More brown
[Image: http://i135.photobucket.com/albums/q136/...BRedo1.jpg]
Side view- Reddish cast front panel
[Image: http://i135.photobucket.com/albums/q136/...BTone3.jpg]
Side view - More brown front panel
[Image: http://i135.photobucket.com/albums/q136/...BRedo2.jpg]
I was having trouble getting the camera to display the front panel as it really is. These are the best photos I could get.
Ed
Posts: 104
Threads: 11
Joined: Oct 2005
City: Indianapolis, IN
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
I agree. It looks very nice.
Mike
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Thanks guys. I think it is ready for the final clear coats now. That may be a few weeks, since I have to spray outdoors. I have to wait for the right weather conditions, i.e. low humidity.
Ed
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Well, we finally got some decent low humidity weather, so I was able to spray the final lacquer clear-coats on several radios in the last two days. Here are some pics of the 650B I have been working on.
Before any work was done
[Image: http://i135.photobucket.com/albums/q136/...50BCab.jpg]
Final right side
[Image: http://i135.photobucket.com/albums/q136/...RtSide.jpg]
Final left side
[Image: http://i135.photobucket.com/albums/q136/...ftSide.jpg]
Final Front
[Image: http://i135.photobucket.com/albums/q136/...nalFrt.jpg]
Now I need to order that new grill cloth. And, oh yes, I really have to rebuild those darned Philco 'tar baby' capacitors. Yuk! Oh well, its worth it.
Ed
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Very nice Ed ![Icon_wink Icon_wink](https://philcoradio.com/phorum/images/smilies/icon_wink.gif) That's going to look SWEET when she's all together and playing. Ahhhhh, those cap blocks are nothing
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
For those that don't check the cabinet forum, another Barry Jones refinish
http://www.philcoradio.com/phorum/showth...p?tid=1339
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 337
Threads: 15
Joined: Nov 2005
City: Ortonville, MI
It's safe to say that the frontends in al of those '36 3 band Philcos were outstanding performers. While the RCA tuners that year were exceptional, Philco had the jump on everybody except Scott from late 1932. Philco's 16 sold like hotcakes, and to Philco's surprise, it wasn't the extanded audio of the 16, but the customers were going after the shortwave bands. True, some did notice and appreciate the higher fidelity of Philco, especially the ones with the U-2 speaker.
But, you have to wonder why RCA (my other favorite) took so long to figure out how to make an all-wave radio with bandswitching as we came to know it. RCA's best accomplishment was their 140 family in 1935. They couldn't mount their coil groups in a turret configuration, but they had a big rack in the chassis that was in the way of everything you needed to get at in the set. You have to remove the coil rack to service (or re-cap) the set! I've done it, and it ain't fun. Fortunately, it was the last of RCA's abominable deep chasis sets. Alan Douglas once remarked that many manufacturers, including RCA, didn't know how to make a small radio.
So, for those who are just now seeing how their Philco receiver performs after re-cap and alignment, Don't expect everyone to do handsprings and cartwheels over it with you. We've all been there before.
Posts: 25
Threads: 9
Joined: Mar 2008
Ron;
I just finished restoring the chassis of a 116b but I need to get the shadow meter working right.
The cabinet, I used a re finisher to remove the old finish. There is a little of the wood missing in the brown stripe. Any ideas on how to repair that?
Posts: 1,472
Threads: 89
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Ron,
Barry did do a nice job on that cabinet .
Far as doing alignmet my siginal gen is acting up I need to get a solidstate one instead of tubes one.
Sincerely Radio Rich
P.S. I wish my first refinising job would have turned out that nice problem I ran in to is on the sides trying to tone the Popular to match the from my front turned out nicely but I should have lighten a light around the knob area but anything looks bettwer then painted with off white laytex I didn't think that laytex would ever come out of the wood grain also the duby painted the knobs too.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
Who's Online
|
There are currently no members online. |
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|