westinghouse wr-370 console
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Today I found a interesting console..And I do not ever remembering anyone on the phorm talking about westinghouse radios. Is this radio a good performer? The radio chassics has a bit of rust. The cabinet of the radio is in good shape along with the grill cloth..Has anyone else seen or heard this radio play? :
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Whats wrong no one can help me out? I hope someone will grt back to me with some information before the console is sold.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I'm not familiar with that model. With 12 tubes, though, it should be a good performer. If you like it, go get it!
--
Ron Ramirez
Ferdinand IN
Posts: 7,288
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Hi John
From the diagram looks to be a fairly upper end set. It features a rf amp, separate mixer/ osc tubes, P/P output with a phase inverter tube (unlike most Philco sets) , push button tuning and a phono. Haven't worked on many of the 1940's Westinghouse so don't know if It has rubber wiring. If the price was right I'd get it.
Terry
ps and an Eye tube too!!!
(This post was last modified: 03-03-2014, 09:40 PM by Radioroslyn.)
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
A picture or a link would help so we'd know what the radio looked like. But like Ron said, if you like it, then go for it...
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 15,832
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
This has been my approach all along. If I like it, the performance be d**ned.
With that many tubes it cannot completely suck.
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Going to go back to the consignment shop today (Wed) hope it is still there It was only $25.00. Thanks guys for the incouragement...Lets see what happens when I get it home! I was told by the wife "we have no more room" when we saw it a couple of days ago.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
...and you listen to your wife? Aah, sneak it in when she isn't home a'ready.
But seriously, $25 is a nearly giveaway price, especially for a 12-tube radio...good luck!
--
Ron Ramirez
Ferdinand IN
Posts: 15,832
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
With the cabinet in a good shape and 12 tubes for 25 bucks.....performance is no longer of interest!
Are you kidding me!
Go and grab that before I go and grab it (OK, not I but someone who is close).
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
The Radio was still for sale. Took it home and the little women gave me a big stare. I told her dont get your panties in a bunch, it only cost me $25.00. She just walked away an did not say anything.
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Well, you got the radio! Now, I wonder how much grief she will eventually give you over it...
No matter where you go, there you are.
Posts: 4,382
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
Searching in RMorg, I don't see that Westinghouse ever sold a console bigger than 12 tubes before WWII. There were 2 versions; in '37 there was single-IF with AFC, and in '38 there was two-stage IF, no AFC.
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Guys the cabinet is in really good condition, maybe a little GOJO to get it cleaned up. But the innereds of the radio has a little bit or more than a little bit of rust. It must of have been stored in a damp place. Hay but for $25.00 Lets see .....No loss or gain...If the tubes check out OK it was a win...win....
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 60 Squealing
|
Wavetrap no longer matters.morzh — 05:19 PM |
Philco 60 Squealing
|
Rod, I had checked out your suggestions but did not help. I did solder the ground rivets to the chassis as Chas suggeste...dconant — 04:52 PM |
37-690 Bass Choke Replacement
|
Yeah, I know, Mouser and Digikey don't have "big iron" components. For some reason Philco was messing with the...Radiodial — 04:25 PM |
37-690 Bass Choke Replacement
|
Yes, I just had to deal with that while repairing the 37-604 Philco. Exactly that value choke was gone. And the current ...morzh — 03:52 PM |
37-690 Bass Choke Replacement
|
Ah, now where to find one.
I've into this before on smaller sets, I now recall. Hammond makes one that is only rated...Radiodial — 03:27 PM |
Philco 38-7 Speaker
|
Ask the admins to put them together.
As for the renaming, while inside the thread, you simply press "New reply&quo...morzh — 02:23 PM |
37-690 Bass Choke Replacement
|
This is the parts catalog.
32-7528 choke is 65H, 10mA, 2,250 Ohm inductance.
Find a suitable one.morzh — 02:18 PM |
37-690 Bass Choke Replacement
|
While troubleshooting the no bass amplification issue, I think I found the culprit. The choke #104 is reading 164K ohms....Radiodial — 01:42 PM |
Philco 60 Squealing
|
Your IF transformers are tuned to the resonant frequency they were designed for. When you observe the bell curve they di...RodB — 01:35 PM |
identify very thin wire for replacement on 37-640
|
Thanks so much for your help! I really could not have gotten this far without the kindness of you and other members. T...georgetownjohn — 11:50 AM |
Who's Online
|
There are currently no members online. |
|
|