Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Today received my Philco 66.
I am sure I overpaid but then I am in NJ an nothing comes up here hence the eBay.
$150 shipping included in the amount.
Age shows in wear, but no egregious damage at all and the cabinet is very solid, this is why I liked it. And the chassis is simply dusty.
http://www.ebay.com/itm/Philco-66-tombst...true&rt=nc
This is the one.
These are my pics of it.
Posts: 239
Threads: 10
Joined: Dec 2013
City: Columbia, SC
That's a fantastic looking radio, congrats! 
Posts: 668
Threads: 144
Joined: Jun 2011
City: Elko,MN.
Great find,
Rub her down with a little Howards restore a finish and your good to go.
Congrats,
murf
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Yep. I think maybe first some GoJo? It looks a bit grimy - could use some cleaning.
Or does GoJo then ingterfere with Howards?
Posts: 668
Threads: 144
Joined: Jun 2011
City: Elko,MN.
I just rub it down with howards using 0000 steel wool, followed with howards wax treatment.
Have fun.
murf
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
OK. So (and I asked that question before) - should I buy any particular shade of Howards or it does not matter muc?
Will medium walnut do?
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Just looked at it and realized all three tube shields are missing. I guess I got so excited about the non-rusty chassis and decent cabinet that I totally overlooked it.
Oh well, can't be perfect.
I think eBay has them for some acceptable price.
Posts: 668
Threads: 144
Joined: Jun 2011
City: Elko,MN.
They have different colors.
Menards has it for about $9.00 a can.
murf
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Looks nice morzh, I have always admired that cabinet design.
Gregb
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
There's another one with concentric semi circles.
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Yes, I know that one, it is very nice as well. I do like the 60 series of radios, they work really well with a small tube count.
Gregb
(This post was last modified: 03-11-2014, 11:15 PM by gregb.)
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Here is what you do Mike,
Take her down to bare bones. dismantle the body and lay it flat on a padded surface. using a q-tip and some lacquer thinner brushing counter clockwise in 1" circles, remove the finish. should take about 4 hours if done right. Then remover exactly 1/100th of an inch of the top veneer using a dull hand planer. (very important so you don't get any pink elephants in the finish).........Ok wait, that might have been part of a dream last night?
Or you can just use Howards too. 
I think I need to go back to bed for a while. 
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 03-12-2014, 07:05 AM by OldRestorer.)
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
A nite cap takes care of those.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
I have a similar model, a 66B. I completed the chassis but the woodwork will have to wait until Spring.
Does anyone know what shade I should use for the front and sides?
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Wow Eric, you really shined up this one; could pass it for a small E.H. Scott chassis
Looks a bit like one of those hot rod car's intestines, all chrome-plated.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Shadow Meter Bulb
|
| Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
|
Shadow Meter Bulb
|
| Ok. Thanks for the correction.RossH — 03:09 PM |
|
Model 28L
|
| For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
|
37-60 revision 6
|
| I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
|
Shadow Meter Bulb
|
| Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
|
Hickok AC51 tube tester
|
| Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
|
Model 28L
|
| Hello,
I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020.
Can...HORSTE — 10:32 AM |
|
Philco 42-1008 conversion kit
|
| I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Tim
Well...a chassis is metal. Magnetic or not, it does not matter.
A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM |
|
Hickok AC51 tube tester
|
| I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM |
|
Who's Online
|
There are currently 4560 online users. [Complete List]
» 2 Member(s) | 4558 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
