Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Resto pics for Tab10672
#1

Hey,

I know you wanted to see the resto pics for the Airline and Aircastle radios, so here they are.

I fully stripped most of the veneer and did about 10 spot patches on the cabinets. I glued down all the underwood and separations. The Aircastle needed a new grill so I fashioned one and matched it. I stripped all of the old finish and gave them 2-3 coats of grain filler.
               


I stripped the chassis', derusted, cleaned, polished the Aircastle chassis but had to paint the Airline due to the pitting. I am in the recapping and rewiring stage for both.
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

   
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Wow, Kirk! Wow! Wow x 10!
Respects!
#4

Looks great, I always liked the look of the larger one. It is nice to know they will live on rather than thrown away by someone who wouldnt take the time to repair the cabinets. I cant wait to see the finished 84
#5

Toning the Airline today:


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

Looking good!!

The artist formerly known as Puhpow! 8)
#7

thanks Pow,
I finished her today minus the speaker I need to send out for repair.

Does this grill cloth look really bad??? please be honest.. It is the whiskey rayon but I dont know.... Maybe not in this radio...

Does anyone think I should use some contrasting toner? I think she just looks BLAH! Maybe darker on the side columns?


Attached Files Image(s)
           

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

I think the original cloth was whiskey, like the 70/90 cloth.
#9

this is the whiskey cloth. It actually is a bit different than the original. This one has smaller clusters. it is from Ken, the original in this radio is much more like the one from radiodaze but the color from radiodaze is too gold.
Dont know why this one looks green.

May have to do something about it.

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#10

I wish someone would try to duplicate the old 70/90 grille cloth accurately again.

The previously available replacement cloth from John at grillecloth.com was great and looked very original as to pattern and color, but the latest attempts are not even close.
#11

I thought the green tint was just photo lighting. The original cloth for that radio was identical to the original whyskey cloth sold by grillcloth.com. What you have may be as close as you are going to get.
#12

At one time I had an Aircastle very similar to that model. I always wondered what year it dated to?

   

Greg V.
West Bend, WI
Member WARCI.org
#13

Yes, I have seen that model Aircastle when searching for this one online.
I like that grill more than this one.
I just don't have any love for battery sets. Icon_lol
Unless it has a working battery...

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM

[-]
Who's Online
There are currently 2736 online users. [Complete List]
» 2 Member(s) | 2734 Guest(s)
AvatarAvatar

>