An Old Dog learns something new.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I came across a model 91 cathedral a while back, even though the chassis was, as we used to say in the USMC, "Fugly," the cabinet was decent. For 50 bucks, what the heck!
What I intended to do was get a late model 14 chassis and a K-17 speaker I had hanging around working and install them in the 91 cabinet. Voila, a model 14 cathedral. Right?
Fast forward to last night. Three bad coils have been re-wound, installed, and the set is aligned to where it is playing nicely. Now for installing it in the 91 cabinet. Unfortunately this is where the story goes wrong.
I had ASSUMED that the chassis of the 91 and 14 were the same. That is true for the EARLY 14 and 91, it is NOT true for the late model 14. The controls on the late model 14 are spaced farther apart like the 16, 17, 43, etc....
Lesson learned.
This sounds like a job for Steve Davis.......
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Ugh...Tom, I feel yer payne. Not with radios but been there. Nuff to spoil a whole evening.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, I uttered some naughty words....
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
I don't utter, I shout them and in Russian too, and this is nasty.
Straight burbon helps afterwards.
Alternative burbon doesn't.  
Nor does vodka. Vodka if anything exacerbates frustration.
And absolutely no wine when that hapens. Wine makes you pensive. Getting pensive while having a fiasco like this happen to you leads to bad thoughts like suicide. No thoughts. Hence straight burbon.
(This post was last modified: 03-20-2014, 09:40 AM by morzh.)
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Two words . . .
Single Malt
8)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
You know, Tom, if you really want to get creative, you could take some measurements, remove the off-on-volume, band switch and tone controls, drill new holes and remount the controls to match the 91B cabinet holes.
You would have to be sure the tuning control shaft was at the proper height, and be sure the controls would all fit when jammed closer together.
It's worth making some measurements...
Sacrilege? Not as bad as taking a console cabinet and turning it into a touchscreen-Ipod-thingy that will be obsolete by next year.
--
Ron Ramirez
Ferdinand IN
Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio
I want to do something similar with a 71b cabinet that is missing the chassis and needs a new control/speaker panel but I have not seen any other knob configuration that uses the 71 cabinet, if anyone knows of another? I have a few cathedral sized chassis without cabinets.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
A 70 chassis will fit a 71 cabinet, and vice versa. I have a nice 70 cathedral with a 71 chassis inside.
--
Ron Ramirez
Ferdinand IN
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Chuck,
Actually these several days my beverage of choice has been the Douglas of Drumlanrig's 14 y.o. version of Laphroaig, and it is yammie (it is my second time I buy this one) - it tastes even better than Laphroaig 18 years. (I love Islays).
yes, single malts are good, at least many of them. And I have yet to meet one I didn't like.
(to anticipate teh question of is there any type of aqua vitae I don't like, yes - regular jack Daniels I do not like. No offense to Tennessee).
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Hmmm…I'll have to try that Douglas. I do like Laphroaig, but it's been a long spell since that last bottle. 'Bout time to try your suggestion then.
Strictly for medicinal purposes only.
Chuck
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
But of course. 20 drops, no more.
Advice - open it a day before, let it breath in a bit. You know those Islays, they are really pungent at first. It really mellows after a couple of days.
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Yes, I'm aware. I usually open up the aroma and taste with a tiny splash
of water with a calibrated right handed swirl, once in the proper glass.
8)
Chuck
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
When I did drink I preferred white russians made with Smirnoff 100 and cream. Not particular about the brand of kahlua.
These bombs will make you believe that you are good looking, that you are bullet-proof, and eventually that you can fly.
Unfortunately, after the fun was over I often woke up on my couch but my car was not in my driveway.
Posts: 262
Threads: 27
Joined: Jan 2010
City: Rochester, NY
Ahhh, the old dayz. At least it was YOUR couch you woke-up on.
Next week it'll be 6 years..
One day at a time!
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Cannot Adjust an IF Transformer’s cores
|
| It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
|
PT-6 antenna connections
|
| I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
|
40-150 General questions
|
| Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
|
40-150 General questions
|
| I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
|
40-150 General questions
|
| It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
|
40-150 General questions
|
| Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
|
Philco 38-7 Speaker
|
| 7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM |
|
40-150 General questions
|
| I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM |
|
Philco 38-7 Speaker
|
| FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM |
|
Philco 38-7 Speaker
|
| Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM |
|
Who's Online
|
There are currently 2749 online users. [Complete List]
» 2 Member(s) | 2747 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
