Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Look at this Beauty of a Philco 40-150 I found today !!
#1

Just need a dusting off, appears to have been electronically restored and the finish looks original !! How Sweet !!
Rock


Attached Files Image(s)
   
#2

Very, very nice! I have a Philco 39-25 which is similar in design and it is one of my favorites. That is a nice looking unit! Enjoy!

Craig R.
#3

Great find, I just got a 155 this week, these are big suckers.

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

Great find. I really like this design, especially with the red light shining through the push buttons.

It performs pretty well, too. Just remember to do all the dial alignments with the loop antenna connected. I think there are five or six different connections between the chassis and various parts of the loop. It will act very odd without the antenna connected exactly as it should be. With a test antenna like many of us have at our workbench it will work well enough to restore and troubleshoot some problems, but you might get squeals and other odd symptoms that could throw you off. I spent a really long time trying to fix various problems until I gave up and put it back in the cabinet. As soon as the loop was connected right, almost all the problems went away.

The other puzzling problem I had was solved by replacing all the grommets isolating the tuning capacitor gang from the chassis. They'll naturally sag with age because of the tension of the dial cord, so make sure they are thick enough and tight.

John Honeycutt
#5

That's a pretty good set!!!

Icon_thumbupIcon_thumbup
#6

Wow! Just, WOW! Very nice set. Great score. Icon_smile
#7

Great find. Although I enjoy cabinet work.. it's nice to find one that won't require both a chassis repair and major cabinet work.. maybe I'm still recovering from that 624 whose cabinet was nearly a goner..




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently 5683 online users. [Complete List]
» 4 Member(s) | 5679 Guest(s)
AvatarAvatarAvatarAvatar

>