Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

bathtube cap
#1

can anyone tell me what a common lug on a bathtub cap is used for, is it a ground lug, if so how is it different from the other bathtub cap with out the common lug
thank you for your help
john
#2

Caps do not have ground lugs, they just have lugs. These can be connected to whatever including ground.

A cap with a common case and two lugs is simply a dual cap with one common. Connect it any way you will.
#3

John, to expand a bit on Morzh's comment, if your referring to the black Philco bakelite caps they generally have a lug on the end the mounting screw goes through. This lug would be chassis ground. Components inside the tub often require one end to ground and this is used for that connection. Should you find a can without a lug on that end (I don't recall seeing any) it just means that the component(s) inside do not need to be connected to ground thus the lug was left off.
Make sense? Chuck's Philco repairbench site will provide a listing of the various tub caps listed by the number etched in their sides. It provides the value(s) of the internals and their connection point.
Chuck's site: http://www.philcorepairbench.com/bblokcap.htm
Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#4

Jerry,

No, bathtubs are these:

http://www.tedss.com/144P107M/?gclid=CO-...7Aodch4AQQ
or
http://www.surplussales.com/capacitors/BathtubCaps.html

Often oil filled.
#5

My bad, I was thinking of Philcos where I have seen them called many things, often derogatory.
Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#6

Those little guys are expensive.

The artist formerly known as Puhpow! 8)
#7

Those are "audio quality" oil-filled caps. Yes, they are expensive.

You mainly see them in audio-phile gear or test equipment.

Some high-end radios also used them. My Scott 800B has them. I tested several and they were all right on, so I left them alone.

I have a box full of them I got from my friend and mentor Bob Timms. Many are appropriate values for my Scott, I am saving them for my Great-Grand Children to have in case one of the ones in my Scott eventually fail.

In fact, I believe that when the atomic apocalypse comes, the only things left will be cockroaches and oil-filled caps.
#8

Quote:In fact, I believe that when the atomic apocalypse comes, the only things left will be cockroaches and oil-filled caps.

...and I will add - the tar from thousands of restuffed Philco bakelite blocks. .Icon_lol ..Somewhere, scattered across the globe.

The artist formerly known as Puhpow! 8)
#9

No....it will mix with asphalt roads.

It will only be found in rural areas....
#10

If you melt the bakelite block tar in a bowl and add sugar it's great on pancakes.
#11

Or you can then introduce yeast, fement it, take it to a nearby still and make "Philco noir" moonshine.
#12

Pardon me, but I thought bathtub caps were used in HV circuits of CRT high voltage supplies in ancient televisions and could cause house fires when failed, but it has been a while...........
#13

Bathtub cap is the one you charge and throw in a bathtub while your MIL is enjoying her bubbles.
#14

..I'd like to do that with the bathtub AA5..Icon_lol

The artist formerly known as Puhpow! 8)




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 42-390, code 121 speaker
>>A closer examination of the very small print schematic indicates that the speaker is a PM type. This shows a ...morzh — 05:18 PM
Philco 60 Squealing
Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM
Philco 6K7
The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND. I am not ...morzh — 05:10 PM
Philco 16B Parts
Thanks for the reply. Unfortunately the radio was removed before bidding was over so I didn't get a chance to bid.dconant — 04:10 PM
Philco 16B Parts
Hi Dan, Mike is correct, there's a lot of painted stuff on the chassis but it looks pretty good. The sm is all there,sp...Radioroslyn — 03:50 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A...captainclock1988 — 03:43 PM
Philco 42-390, code 121 speaker
Using a 5W  1.5k  ceramic resistor in place of the field coil and using a 4 ohm PM speaker, I was able to bring the radi...Stevelog — 02:57 PM
Philco 60 Squealing
I have taken out the 2nd IF and found a problem or not. I believe the coils are litz wire. There is a very small strand ...dconant — 02:13 PM
Philco 6K7
I am restoring a Philco 37-60. The am reception is very good, but the shortwave is very weak. Run 6 Philco removes the g...bobbyd1200 — 01:35 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A5...MrFixr55 — 06:48 AM

[-]
Who's Online
There are currently 5108 online users. [Complete List]
» 4 Member(s) | 5104 Guest(s)
AvatarAvatarAvatarAvatar

>