Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith ID needed
#1

So, what model is it?
These pics are the best I have to work from:

http://i10.photobucket.com/albums/a105/j...-front.jpg

http://i10.photobucket.com/albums/a105/j...llback.jpg


Ok, time to ask for some help here. I may have an oportunity to do some restoration work on this Zenith console. If that day comes I'd like to have an idea what model I'm dealing with and if there are any "sticky" spots to watch for with a novice restorer.

Thanks,

John
#2

John, The pictures you provided look like a 1942 model 10S669. The original finish had a fake burlwood on the front and I had to remove it.If this is the same model your burl wood finish is already gone. I had the cabinet refinished after removing the burwoodl and while not original it looks very good. The biggest problem was replacing rotten wiring. This was very prevelent in the many swithes for the station and tone selectors. Just go slow and replace one wire at a time if yours are shedding the insulation.I also had to replace the tunning drive belt. Mine also had a bad power transformer. (sight unseen from E-Bay) Naturally, you will want to replace the electrolytic and paper capicators. I can only remember one paper capacitor that was difficult to get to. I have been very happy with this radio as it seems to be very sensitive on both broadcast and short wave bands and sounds great. Best of luck and hope you enjoy it.
Dave D
#3

It is indeed a 10S669, 1942 model. This was my first old radio, mine had a bad output transformer and I replaced all the rubber wiring. Yours is an early version as it has the gold dial pointer and gold painted speaker. The later models had a cream plastic "Neptune" dial pointer and a cad speaker as mine has:

http://demandred.dyndns.org/540i/gallery...s/P1150017


http://demandred.dyndns.org/540i/gallery...s/P1150018


I am very familiar with this model and if you need any help contact me at:

sndeclar@embarqmail.com

Steve D
#4

Steve, I am glad you responded to the 10S669 question. I learn something new every day on this site. I did not know about early/late models of this radio. Mine is an early version. How did you find one with the burlwood finish in such good shape? It looks great.Mine was beyond salvage.

Dave D
#5

Dave/Steve,

Great! Thanks guys, I knew this would be a great place to aske the "other radio" question.

This is kind of a weird situation as this radio may end up being a restoration project for a person at work. They were looking for someone to restore it, so I threw my hat in the ring, with a big caution about no guarantees about time or cost. We'll see if anything pans out..... I figured I should do some homework just in case I get the oportunity to work on it.

Steve, couldn't get your pics to open, not sure why, but no go. I may be taking you up on your offer if this comes through.

John
#6

Oh, by the way, on the back view, what's the purpose of the switch that is to the right rear of the chassis, attached to the chassis support (wood shelf)? Any ideas? Is that something OEM or somone else's handy work?

Thanks.
#7

Someone added that switch. Can't tell what's on the back of it. A coil of some sort? BTW, here's what the finish should look like
http://www.tuberadioland.com/images/zeni...669_9_.gif


-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#8

Great!, Thanks for the info, I thought the switch was 'after market' but just wanted to check. From the limited photos that I have of it I don't see anything connected to it.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
IF can wire size and Rubber mounts?
Hello PHORUM members, I am still working on restoration of my PHILCO 37-640.  I want to start with rewiring the IF ca...georgetownjohn — 06:32 PM
Gilfillan Brothers Car Radio?
There is a Mission Bell model 19/19A that could be what you’re looking for, Riders vol 4. It has the tube line-up of: 0Z...Joe Rossi — 05:01 PM
Looking for verification of correct schematic.
Definitely 870044RossH — 01:12 PM
12' Philco
Wonder if the chassis was big too.daveone23 — 12:38 PM
Philco 38-2 Automatic Tuning
Hi Ron, I have sent Radio Daze my concerns with the dial so I guess we will see. They used my original to make the repro...dconant — 12:27 PM
Hickok AC51 tube tester
How does the  5W4 and 83 tube filaments get fed?martinj — 12:25 PM
462ron
Hi Dan, your original dial appears to be lighter, easier to allow light through. My original is similar except it’s crac...462ron — 12:07 PM
Philco 38-2 Automatic Tuning
I received my new 38-2 dial. I'm a little disappointed. As you can see in the picture the blues have a white shadow. The...dconant — 11:13 AM
Philco 38-2 Low Volume
I have been playing my 38-2 for a while now and it is doing very well. I did have to replace the 6A8 (osc) as it develop...dconant — 11:03 AM
Philco Speaker Spider
Hello, Does anyone with a 3 D printer make the spiders for those old Philco speakers? That might be a good idea for some...dconant — 09:41 AM

[-]
Who's Online
There are currently 3920 online users. [Complete List]
» 1 Member(s) | 3919 Guest(s)
Avatar

>