Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
The June of 1932 15 uses 44s and 37s. I don't think I have ever seen a 37 as a globe tube, maybe the 44 and certainly the 42s in the PP output.
Do you think there was much likelihood of this radio have some/any globe tubes?
Almost all of the tubes in it are STs with printed logos. So they are nice, but wrong for a restored unit.
Man, this thing has some big iron.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 1,114
Threads: 14
Joined: Feb 2013
City: Irvington, NY
When introduced in June 1932, the radio definitely would have had a full complement of the globe style tubes. 1933 was the time of changeover to the ST style, and tube production gradually switched over fully to ST as the year progressed.
I have a few globe 44's with 1933 date codes, so they were still being made that way into the early months of 1933. I have seen globe 37's but they are quite scarce. Its possible that in late production of the 15X there might have been a mix of globe and ST style tubes installed.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I have a few globe 37 tubes. As Mondial said, they seem to be quite scarce.
--
Ron Ramirez
Ferdinand IN
Posts: 5,060
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
The 15X I got from Willie had a couple of globe 37's and 44's, I replaced the rest of the ST's with globes. Looks Great and plays great, one of my new favorite radios.
Gregb
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
I think that I will look around a little before I spend $45 each on the 37s.
From an estate with about 10 other radios:
The top has been refinished already, so I will probably restore the whole cabinet. Anybody need a piece of carpet?
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The set originally had all globe tubes. The 37s are out there. The 42 globes will be the most expensive.
I am in the middle of restoring a model 15X chassis/cabinet. It is definitely NOT the easiest cabinet that I have ever done......
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I think that $45 each is excessive for a balloon type #37, since it is not a power output tube and not really a high demand tube. If it's one of the ones under the tube shield why even worry about it?
Regards
Arran
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
They are out there for much less than 45.00.
In fact, I don't believe that I have ever paid more than 10.00 for an NOS one.
45.00 is more like you would pay for a globe 42.
(This post was last modified: 05-20-2014, 08:49 PM by TA Forbes.)
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
The ones I got cost $10 each, nice finishing touch to a nice radio.
Gregb
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Well, if you find any more Philco brand ones for $10, let me know.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
I will but they are few and far between.
Gregb
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
It took a long time (~4 years!), but I finally found a few to complete my 15DX. I paid around $45 BIN + shipping for the three untested. I got lucky and thy all test like new
Philco branded globe 80s and 42s are pretty scarce too. I suggest you set up a search with email alerts for "Philco globe" on ebay and be patient. Also ask around on the forums and radio clubs.
[Image: https://farm3.staticflickr.com/2924/1360...ea53f7.jpg] [Image: https://farm8.staticflickr.com/7099/7270...67b21f.jpg] [Image: https://farm8.staticflickr.com/7084/7161...82edfb.jpg]
(This post was last modified: 05-24-2014, 02:02 PM by Bob Andersen.)
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Philco 38-7 Speaker
|
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM |
40-150 General questions
|
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM |
Philco 38-7 Speaker
|
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM |
Philco 38-7 Speaker
|
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM |
Who's Online
|
There are currently 2548 online users. [Complete List] » 1 Member(s) | 2547 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|