Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Well, I have finally gone and done it! I bought one of those big, solid state, stereo consoles I always tried to avoid! From what I can tell, this is a 1969 model. Everything works except the phonograph, which sorta works. Only thing I haven't tested is the hookups on the back for the aux/tape connectors and external speakers. Oddly, it doesn't do anything with the speaker select knob on 'both'. Maybe it needs the external speakers to complete the circuit for that? Definitely sounds good.
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Neat! 
If it says "RCA Victor" and has the Nipper logo, it is pre-1968. RCA changed to that ugly new logo in 1968 and dropped the "Victor" from its electronics products, as well as the "His Master's Voice" logo.
I remember as a kid, back in 1968, when I had the chance to look at console stereos, I would do so...and at the age of 8, I could tell older stock from brand new models - the older stock still said "RCA Victor" inside. The new models had that ugly RCA logo, no "Victor." By then I was rather fascinated with the "His Master's Voice" logo. Funny thing, as I grew up, I lost interest in His Master's Voice, Nipper and RCA Victor...maybe because, in my view, RCA dropped everything about their products that was "cool" to me (remember, I was only eight years old when the change was made by RCA).
--
Ron Ramirez
Ferdinand IN
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Hmm, I wonder what year this unit is then? It does say RCA-Victor right on the dial bezel and still has the little Nipper Logo over the RCA logo on the bezel and (worthless) 45 spindle. Yeah, gotta do something about that part.
No matter where you go, there you are.
Posts: 4,702
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
If you can't find a reference for the model there should be a EIA date code on some of the parts inside, such as the filter can cap.
Regards
Arran
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
So far all the references I can find on this model, including old newspaper ads, date this as a 1968-1969 model. I'd post one of the ads here, but all the sites demand you have premium memberships to actually see and copy the full size pages. Harrrumph! 
No matter where you go, there you are.
Posts: 1,108
Threads: 89
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
It's in Sam's 981-6. If you have access to that you can get an idea on the manufacturing date.
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks, Brenda. I'll have to see how far up my friend's manuals go. I am supposed to be visiting him over the weekend.
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Could be also, that RCA produced some 1968 models with the old logo (maybe leftover 1967 tooling?) before switching over 100% to that "new" logo and dropping "Victor" from the brand name?
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 3 Guest(s)
|
|
Recent Posts
|
|
Gilfillan Brothers Car Radio?
|
| There is a Mission Bell model 19/19A that could be what you’re looking for, Riders vol 4. It has the tube line-up of: 0Z...Joe Rossi — 05:01 PM |
|
Looking for verification of correct schematic.
|
| Definitely 870044RossH — 01:12 PM |
|
12' Philco
|
| Wonder if the chassis was big too.daveone23 — 12:38 PM |
|
Philco 38-2 Automatic Tuning
|
| Hi Ron, I have sent Radio Daze my concerns with the dial so I guess we will see. They used my original to make the repro...dconant — 12:27 PM |
|
Hickok AC51 tube tester
|
| How does the 5W4 and 83 tube filaments get fed?martinj — 12:25 PM |
|
462ron
|
| Hi Dan, your original dial appears to be lighter, easier to allow light through. My original is similar except it’s crac...462ron — 12:07 PM |
|
Philco 38-2 Automatic Tuning
|
| I received my new 38-2 dial. I'm a little disappointed. As you can see in the picture the blues have a white shadow. The...dconant — 11:13 AM |
|
Philco 38-2 Low Volume
|
| I have been playing my 38-2 for a while now and it is doing very well. I did have to replace the 6A8 (osc) as it develop...dconant — 11:03 AM |
|
Philco Speaker Spider
|
| Hello, Does anyone with a 3 D printer make the spiders for those old Philco speakers? That might be a good idea for some...dconant — 09:41 AM |
|
Philco 16B Parts
|
| Hello, I'm looking to buy a 16B but I'm not so sure of what I am looking at. First as seen from the picture it looks lik...dconant — 09:17 AM |
|
Who's Online
|
There are currently 2766 online users. [Complete List]
» 1 Member(s) | 2765 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
