Posts: 2,034
Threads: 367
Joined: Jun 2010
City: Dover, OH
No matter where you go, there you are.
Posts: 142
Threads: 15
Joined: Nov 2008
City: Glenshaw, PA
Posts: 16,476
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Posts: 1,468
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Great find.. And the cabinet and grill cloth look nice.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 2,034
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks! I have never really pursued these style Philcos before, but this one was just in too good of shape and the price was right. Now, I will need new pushbuttons for sure and I think this model used the transluscent 'wine' color buttons. Kinda hard to tell as my buttons have degraded down to flakes, literally! Also, what would be the best way to get the green tarnish off the bezel? I have some Brasso, but I don't want to go too far and lose all the patina.
No matter where you go, there you are.
Posts: 152
Threads: 11
Joined: Feb 2013
City: Dallas, TX
Very nice find, Jayce! I might have a set of the repro wine buttons around here, actually.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Amazing...you never know.
Posts: 4,859
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Depending on the year the dial escutcheons on those sets could be bright brass, painted a gold colour, or have a faux wood grain.
Regards
Arran
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
For 1939-1942 Philco escutcheons with thumbwheel controls:
I think the 1939 model escutcheons are brass. The 1940 escutcheons are brass plated (or painted) steel. The 1941 and 1942 escutcheons have the faux woodgrain.
--
Ron Ramirez
Ferdinand IN
Posts: 4,859
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Unless they used up stock from the previous year, the escutcheon they used on my 40-780 was brass, I do not know if it used to have paint on it or no. Bob Andersen's 39-30 was brass but was painted with metallic gold or brass paint rather then bright brass. Neither of these sets used the thumb-wheel knobs however, so the thumb-wheel knob sets like the 39-116 may have been different.
Regards
Arran
(This post was last modified: 06-11-2014, 11:53 AM by Arran.)
Posts: 2,034
Threads: 367
Joined: Jun 2010
City: Dover, OH
I decided to do the magnet test and the little magnet I used will not stick to the escutcheon on the 39-40. So, it is probably brass. As far as any paint goes, that is had to tell, but I have so much crusty green tarnish sticking up that I will have to do cleaning no matter what. Now, the escutcheon on my 40-180 looks like brass, but the magnet sticks right to it.
No matter where you go, there you are.
Posts: 28
Threads: 0
Joined: Nov 2013
City: Tucson, AZ
Check the top corners of the openings where the buttons came through... If there was paint there, that's the most likely place to find any remains.
Pretty set! and the GRILL CLOTH all intact... Unusual.
Users browsing this thread:
|
Recent Posts
|
Zenith H725
|
The PSU filter cap arrived today (thank you USPS!) so I will work on that later.
Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM |
Philco 610B oscillator wiring
|
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM |
The list of my radio & TV collection!
|
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM |
Philco 42-345 Restoration/Repair
|
Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM |
Philco 610B oscillator wiring
|
Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM |
Philco 42-345 Restoration/Repair
|
Hi OSanders,
First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM |
Philco 42-345 Restoration/Repair
|
Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM |
Philco 610B oscillator wiring
|
Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM |
Philco 610B oscillator wiring
|
Some info from Beitmans says late production. David David — 06:06 PM |
Restoring Philco 96
|
Oh wow! Just found this thread. Brings me back to early days on this phorum. I did a 96 back in 2017. Thread here:
...rfeenstra — 06:05 PM |
Who's Online
|
There are currently 2423 online users. [Complete List] » 2 Member(s) | 2421 Guest(s)
|
|
|

|