Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
No matter where you go, there you are.
Posts: 142
Threads: 15
Joined: Nov 2008
City: Glenshaw, PA
Posts: 16,533
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Great find.. And the cabinet and grill cloth look nice.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks! I have never really pursued these style Philcos before, but this one was just in too good of shape and the price was right. Now, I will need new pushbuttons for sure and I think this model used the transluscent 'wine' color buttons. Kinda hard to tell as my buttons have degraded down to flakes, literally! Also, what would be the best way to get the green tarnish off the bezel? I have some Brasso, but I don't want to go too far and lose all the patina.
No matter where you go, there you are.
Posts: 152
Threads: 11
Joined: Feb 2013
City: Dallas, TX
Very nice find, Jayce! I might have a set of the repro wine buttons around here, actually.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Amazing...you never know.
Posts: 4,905
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Depending on the year the dial escutcheons on those sets could be bright brass, painted a gold colour, or have a faux wood grain.
Regards
Arran
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
For 1939-1942 Philco escutcheons with thumbwheel controls:
I think the 1939 model escutcheons are brass. The 1940 escutcheons are brass plated (or painted) steel. The 1941 and 1942 escutcheons have the faux woodgrain.
--
Ron Ramirez
Ferdinand IN
Posts: 4,905
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Unless they used up stock from the previous year, the escutcheon they used on my 40-780 was brass, I do not know if it used to have paint on it or no. Bob Andersen's 39-30 was brass but was painted with metallic gold or brass paint rather then bright brass. Neither of these sets used the thumb-wheel knobs however, so the thumb-wheel knob sets like the 39-116 may have been different.
Regards
Arran
(This post was last modified: 06-11-2014, 11:53 AM by Arran.)
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
I decided to do the magnet test and the little magnet I used will not stick to the escutcheon on the 39-40. So, it is probably brass. As far as any paint goes, that is had to tell, but I have so much crusty green tarnish sticking up that I will have to do cleaning no matter what. Now, the escutcheon on my 40-180 looks like brass, but the magnet sticks right to it.
No matter where you go, there you are.
Posts: 28
Threads: 0
Joined: Nov 2013
City: Tucson, AZ
Check the top corners of the openings where the buttons came through... If there was paint there, that's the most likely place to find any remains.
Pretty set! and the GRILL CLOTH all intact... Unusual.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Model 80 Antenna Issue?
|
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum, PittsburghToast! I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum!
:wave:
We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM |
Model 80 Antenna Issue?
|
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM |
philco predicta
|
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM |
Philco 91 code 221
|
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM |
Philco 91 code 221
|
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM |
Philco 91 code 221
|
I have been restoring one of these sets and switched it on yesterday. It didn't exactly spring into life, but after a co...Philconut — 08:26 PM |
Philco 50-925 antenna connections
|
That's super. Glad to hear you figured it out. Paul.Paul Philco322 — 11:11 AM |
Who's Online
|
There are currently 1302 online users. [Complete List] » 3 Member(s) | 1299 Guest(s)
|
|
|

|