Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

new safety caps from Justradios
#16

Yes pretty much it, it is a some sort of breakown voltage.

BTW Mouser carries Lelon and Xicon, the latter has been aound forever.
But they are mostly GP ones.
#17

Did I say Xicon, I was thinking of Xunda brand caps, Xicon makes cheap parts, and it shows in the gauge of wire leads they use, but I don't think that they are inherently bad or fraudulently rated. Xunda caps are garbage, they are the reason the Toshiba DVD player will not power up anymore. Lelon is a notorious crap capacitor brand, a Taiwan brand yet, I have a computer tower with several swollen Lelon caps on the motherboard, why Mouser pedals their trash I do not know. Su'scon is one I have seen fail in LCD monitors quite frequently. Then you have ones with a name that is sort of like a good name brand, but misspelled like Robycon
If you want to know which electrolytics to stay away from, try www.badcaps.net , whenever I find a mystery brand I run a search on that site. You can also try mystery brands of polyester film caps, I did with the TC brand ones some places sell, it seems there is nothing noteworthy about them, at least in a negative way.
Regards
Arran
#18

Just checked my last order of caps from Mouser from about 2 months ago they were all high ripple. Blind pigs finds a acorn. Thanks again David
#19

Thanks for the link to the ceramic safety caps. I keep screwing up and getting the plastic box type with very short leads Icon_sad

They don't seem to carry much in the way of 500v caps at Mouser but Digikey has a nice selection. 10uF @ 500v, 10000 Hrs @ 105°C Nichicon are $1.83: http://www.digikey.com/product-detail/en...ND/3664442 Only $1.44 qty 10+.

That being said, JustRadios has great prices on mica caps and some hard to find stuff like 1W and 2W resistors in the megaOhm range and higher voltage (1000V+) caps.
#20

Thanks for the link, Bob... I need to get to digikey more often. they were the only place that carried the caps I needed for the PS in a battery set who didn't want 35 bucks a piece for them.

I've also ordered some of the ceramic caps from mouser.. along with the caps that were backordered (Space restrictions limits my flexibility)




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM
Philco 41-608 changer coupler
Thanks, Morzh. That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM

[-]
Who's Online
There are currently 6362 online users. [Complete List]
» 1 Member(s) | 6361 Guest(s)
Avatar

>