Bought Stromberg Carlson AWP8
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Will post pics when get it.
It is SC transoceanic similar to others, in 50s RCA, Hallicrafters and SC made their versions.
I was waiting for this one awhile - there are rare and those really clean are even rarer.
Like this one
http://radioattic.com/item.htm?radio=0260515
Posts: 41
Threads: 4
Joined: Jun 2011
City: Fort Myers, FL
Mike
That's been on my bucket list for sometime. It really is hard to find a real nice one. However i just bought a Pretty Nice RCA Strato World 3bx-672 in the rare alligator case. Waiting to see the pictures of the one you bought!!
Sincerely
Keith Jansen
Posts: 669
Threads: 145
Joined: Jun 2011
City: Elko,MN.
How does it compare to the zenith's
Have had a couple of those.
Looks like the SC has a more durable material on the cabinet.
Neat radio.
murf
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Keith
Yp, I have been looking for RCA strato myself, though I thought of a 7bx.
Murf.
I am sure the later Zs and their ounterparts were comparable. The SC looks too sophisticated to be much worse
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
Congratulations, those are pretty neat, did you find it on eBay?
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 41
Threads: 4
Joined: Jun 2011
City: Fort Myers, FL
Mike
I have had the 7BX-10 and as it is a nice radio, the cabinet covering is not leather but vinyl, and it does not hold up as well especially on the sides.
Keith
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Keith
Yes I thin standard issue 3bx and 7bx were vinyl, or at least it looks like it, usually yellow.
John
Yes, eBay.
There are two more on eBay right now, one recent (shown closed) and one has been there awhile - the condition and the price are a bit of a mismatch.
The auction was at 2am, so I set the alarm, and sniped $321.00 (last bid was $264). 1s before the end someone sniped so my bid came up to $314. The guy miscalculated by 7 bucks. Like myself with that Philco 16 2 weeks ago. I paid right there and went back to sleep.
(This post was last modified: 07-06-2014, 03:57 PM by morzh.)
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
hey mike
think you better snipe a comfy bed soon for the garage
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
The one you won looks pretty nice and it has a lot of the original literature which is a big plus. Now you'll be able to predict the weather with the built in barometer, temp, and humidity gauges.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
http://www.ebay.com/itm/1956-Stromberg-C...true&rt=nc
John
The one I ordered is here above unless you have the org listing yourself - the one I gave is just another AWP8.
Still looks nice.
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Sam
You saw my hatch in the Jeep - always carry a sleeping back and a tent. Who knows where the night will find ya....or your honey's cast iron skillet....
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
There is someone with a real crappy one in the Bellingham, Washington area, on Craigslist, they want like $400 and it has torn fabric and corrosion on the metal trim, needless to say it has not sold.
Regards
Arran
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Oh I am sure there are those around. It's the nice ones that do not pop up often; most of those I've seen on eBay have discolorations, rusty bottom hinge, knobs in bad shape....and they want the same or higher amount for them than I've just paid.
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Like this one on eBay
http://www.ebay.com/itm/350130241184?ssP...1423.l2649
Notice the trim finish all peeled off. And such. and the price is.....$394 BIN.
Posts: 41
Threads: 4
Joined: Jun 2011
City: Fort Myers, FL
Mike
That one on ebay from Mara Industrial has been up for sale at least 2 or 3 years!! You would think if he could not sell it for that price for this long that he would drop the price, plus it does'nt even work and is in rough condition.
Keith
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Philco 38-7 Speaker
|
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM |
40-150 General questions
|
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM |
Who's Online
|
There are currently 2740 online users. [Complete List] » 2 Member(s) | 2738 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|