Brunswick Panatrope with Radio S31
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Groundhog, that is just a lovely radio and the style I like. The price was exceptional. Just a classic looking radio from the era. No tubes, well, unless there are a pair of 45s, should be very reasonable to restuff it. I would have preferred something similar without the turntable but it looks like that one is complete. You just done good! I would go for that over a 12 tube Zenith. I love that screen "door" on the back. Same as my Fada 46. I hope you don't encounter and pot metal problems as I did.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 07-11-2014, 04:18 PM by jerryhawthorne.)
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Wow, look at the prices. We here cannot buy junk for this price.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
There are a pair of 245s in mine but mine has the B-Tully radio. Must be a month or two newer than yours.
You will probably need to re-rubber and re-magnetize the pick-up.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Tube lineup looks like 4- 24's, a 27, an 80, 2- 45's and a "regulator" tube. I got a deal on a pair of 45's last fall on the bay for my Philco 95 Lowboy...I'll just keep watching. Have to figure out what the regulator tube is.
(This post was last modified: 07-11-2014, 04:57 PM by Groundhog74.)
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Ballast. What number is it supposed to be?
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Looks like it's supposed to be a D-110.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
(This post was last modified: 07-12-2014, 12:02 AM by Phlogiston.)
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Very nice Phlog (Russ).
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Does anyone know if the metal parts, dial escutcheon, tone arm, medallion, needle cups, etc. are brass, brass plated or what? I'd like to clean/polish them up but not sure how they are made and what to use when restoring. Thanks for any help.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
I'll look, but I think that they are nickel plated and can be cleaned if you don't get too aggressive.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I would clean them, but be very careful about polishing them, particularly the dial escutcheon. In spite of what many think a lot of trim parts on old radios and phonographs were not supposed to bright metal to start with, they left the factory with a matte, an antiqued, or sometimes a blued finish. If that Brunswick were mine I would give that stuff a cleaning but leave it alone, it looks very nice as it is.
Regards
Arran
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
Wow that's very nice 2 hr drive would be worth it cabinet looks to be in great shape finish original ?
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
As far as I can tell everything is original. There are a few flaws in the finish that do not show up on camera, small pieces of veneer chipped out on an egde etc., but nothing major. Should clean up very nicely. I thought for the price I got it for, a 2 hour drive was worth it. The only things I have noticed during initial cleaning are the power cord is frayed in a couple of places (no biggie) and the dial scale is popped loose from the tiny rivets that hold it in place at both ends, the center rivets are still holding. I found a source for a reproduction of the original owner's manual, and I will order it soon. The felt on the turntable is in really good shape, but extremely dirty. A good cleaning with something (?) will probably make a huge difference in it's appearance. Hopefully I can collect all the tubes I need soon and start on getting it working.....along with the other half dozen radios that need fixed.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Philco 38-7 Speaker
|
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM |
40-150 General questions
|
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM |
Philco 38-7 Speaker
|
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM |
Philco 38-7 Speaker
|
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM |
Who's Online
|
There are currently 2595 online users. [Complete List] » 1 Member(s) | 2594 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|